Motor Controller

Specifications

Applicable Documents

  • 20100808 Procurement document AAC
  • 20080508 561s003 Elevation utilities electrical power supply requirements
  • xxxxxxxxx ARGOS-MPIA-SWA-ELEC-CR-001 Swing Arm Interlock Change Request
  • 06012011 565s005 ELRIO/ARGOS Swing Arm Interlocks

Datasheets

Verification

Manuals

Current manual is missing:
  • stow pin in
  • password Simotion/Simotion
  • is not up to date to the current from everywhere you can use

Issues

argos_swingArm_electronics_cabling1.2.pngargos_swingArm_electronics_cabling2.2.pngargos_swingArm_electronics_cabling3.2.png

Table 1
Adjacent Side
Adjacent LBC junction to calibration swingarm motor 4800 1780+2400+620
C-ring rack to adjacent junction 1770 1030+740
Service loop 1000
     
Total 7570  

Table 2
Opposite sideSorted ascending
   
adjacent junction to C-ring rack 1770
cable tray (windbrace) 8700  
cable tray to adjacent junction 2270 1000+1270
calibration swingarm motor to cable tray (windbrace) 1500 1780-1000+2400-1030-1270+620
service loop 1000
Total 15240

2. Summer installation

  • SwingArm rack goes SX (confirmed by LBTO - J. Brynnel)
  • lock terminal goes into treehouse
  • temporary ethernet installation with laptop provided to run the swingarms
  • delivery end July beginning August (earlier better)
  • no MOCON

This topic: Software > Wiki:hardware_overview > WikiSwingArmMotorController
Topic revision: 07 Aug 2018, AndrewColson
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback