Calibration Unit installation
Fiber extension and routing?
How far are the fibers routed for the white light sources in the ASM ?
How far are the fibers routed for the green laser diode light sources ?
What fibers are needed (length/type) ?
Who does the routing ?
Light sources second C-ring Rack?
C-Ring Rack where the white and green light sources will be installed probably mid march or earlier.
Preparation for vibration measurement as backup and online tool for swing arm damping if necessary
0ne 3 axis accelerometer on top of Calibration Unit (plate with adapter for accelerometer)
Data translation box
Preparation for laser tracker measurements
prior get position measurements of fix points to which the arm was measured by Wolfgang to have an idea where we are.
Set up software to calculate adjustments to be made from the laser tracker measurements.
Fibers for green/white light sources for routing
Green diode sources
White light sources
Mount for retro-reflectors on swing arm
Data translation box + software
Mount for 3 accelerometers
Light source test
Laser tracker measurement for rough adjustment
Calibration unit installation with final harbor and cover
Fine adjustment with FLAO and LUCIFER
Final fine adjustment with FLAO and LUCIFER
(10 days + 2 contingency + 2 arrival and departure = 14 days)
Needed for test #
help with harbor installation
This topic: Software
08 Aug 2018,
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki?