Pockels cell Basdard configuration example

  • CONFIG:Endpoint=[NAME=DX_PockelsCell,TCP=149.217.44.166:10241]
  • SVC.CMD.SETOUTPUTVOLTAGE
  • SVC.CMD.SETUP
  • SVC.CMD.SHUTDOWN
  • SVC.CMD.STARTUP
  • SVC.CONTROLLER_STATE:String=UNKNOWN
  • SVC.DEVICE_ADDRESS:String=tcp://192.168.26.102:80
  • SVC.HEAD.ALIVE:Bool=1
  • SVC.HEAD.BOARD_TEMPERATURE_IN_C:Double=0
  • SVC.HEAD.INHIBIT:Bool=0
  • SVC.HEAD.MONITOR_FAULT_A:Bool=0
  • SVC.HEAD.MONITOR_FAULT_B:Bool=0
  • SVC.HEAD.POWER_SWITCH_OK_A:Bool=0
  • SVC.HEAD.POWER_SWITCH_OK_B:Bool=0
  • SVC.HEAD.STATUS_BYTE:Int=32896
  • SVC.HEAD.TRIGGER_ACTIVE:Bool=0
  • SVC.HEAD.TRIGGER_ENABLED:Bool=0
  • SVC.IS_REACHABLE:Bool=1
  • SVC.LAST_ERROR_CODE:Int=512
  • SVC.LAST_ERROR_REPORT:SeqString=["Controller memory corrupt"]
  • SVC.NAME:String=DX_PockelsCell
  • SVC.POLLING_PERIOD_MILLISEC:Int=1000
  • SVC.PSU.A_I_REGULATOR:Bool=0
  • SVC.PSU.A_ON:Bool=0
  • SVC.PSU.A_V_REGULATOR:Bool=0
  • SVC.PSU.B_I_REGULATOR:Bool=0
  • SVC.PSU.B_ON:Bool=0
  • SVC.PSU.B_V_REGULATOR:Bool=0
  • SVC.PSU.HV_REMOTE_ENABLED:Bool=0
  • SVC.PSU.MAX_VOLTAGE_IN_V:Float=6000
  • SVC.PSU.MIN_VOLTAGE_IN_V:Float=0
  • SVC.PSU.NEGATIVE_CURRENT_MILLI_AMP:Float=0
  • SVC.PSU.NEGATIVE_VOLTAGE_IN_V:Float=0
  • SVC.PSU.POSITIVE_CURRENT_MILLI_AMP:Float=0
  • SVC.PSU.POSITIVE_VOLTAGE_IN_V:Float=0
  • SVC.RAMP_DELAY_IN_MS:U32=1000
Note: The properties in bold fonts can be changed in the configuration files by the user as desired. Basdard need to be restarted in order to apply the changes.
Topic revision: r1 - 05 Jun 2018, AndrewColson
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback