Laser Innolas

In order to control the lasers with the ARGOS applications, the NPORT server must be configured as follow:
  1. Technical data and initial configuration
    • TCP Server Mode
    • Baud rate: 19200
    • Data bits: 8
    • Stop bits: 1
    • Parity bits: None
    • Error check: None
  2. Basda Configuration for the Laser Innolas
  3. Innolas Laser Commands

Current Laser Engineering GUI

Operation Tab

In this tab the user can set the pulse frequency, the operating current, and the standby current. Additionally, we can set the diode in standby.

Screenshot-1.png

Status Tab

This tab shows the status of the laser system, such as temperature, water flow, hardware key position, etc.

Screenshot-2.png

Advanced Tab

In this tab the user will see extra information, like operating hours of the diodes and software versions. Additionally, the external trigger can be set on or of in this tab.

Screenshot-3.png

Deprecated Laser GUI

Screenshot.png

Topic attachments
I Attachment Action Size Date WhoSorted ascending Comment
NanioConfig_basic_RevBN_2010-02-17.xmlxml NanioConfig_basic_RevBN_2010-02-17.xml manage 153 K 07 Aug 2018 - 17:25 AndrewColson  
Screenshot-1.pngpng Screenshot-1.png manage 62 K 08 Aug 2018 - 17:30 AndrewColson  
Screenshot-2.pngpng Screenshot-2.png manage 65 K 08 Aug 2018 - 17:28 AndrewColson  
Screenshot-3.pngpng Screenshot-3.png manage 55 K 08 Aug 2018 - 17:29 AndrewColson  
Screenshot.pngpng Screenshot.png manage 58 K 08 Aug 2018 - 17:29 AndrewColson  
Topic revision: r5 - 08 Aug 2018, AndrewColson
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback