Laser Innolas

In order to control the lasers with the ARGOS applications, the NPORT server must be configured as follow:

1. Technical data and initial configuration
   • TCP Server Mode
   • Baud rate: 19200
   • Data bits: 8
   • Stop bits: 1
   • Parity bits: None
   • Error check: None
2. Basda Configuration for the Laser Innolas
3. Innolas Laser Commands

Current Laser Engineering GUI

Operation Tab

In this tab the user can set the pulse frequency, the operating current, and the standby current. Additionally, we can set the diode in standby.

Status Tab

This tab shows the status of the laser system, such as temperature, water flow, hardware key position, etc.

Advanced Tab

In this tab the user will see extra information, like operating hours of the diodes and software versions. Additionally, the external trigger can be set on or of in this tab.

Deprecated Laser GUI