SPC_A200_Expo_Time_Read_by_PCI_A300, etc. any error code descriptions
|July/Aug 2016|| The INAF CMU is back in Tucson (accessible via 188.8.131.52).
Fernando, Kellee, Allesandro C perform checkout on the mountain with the latest BBB see LBCBBBMountainTestingJuly2016 and LBCBBBIntegrationTesting
See IT 6056 about IT setup of the Tucson/mountain testing.
|May 2016||Fernando, Bellesi, and Kellee performed testing at SkyTech. See notes|
|Jan 2016||Tracking and image analysis code running on the CMU (version 2.1) was released|
|Summer 2014||Switched to the new CMU, with the updated PCIExpress profibus card.|
#0 0x088dde65 in IDL_RBtreeSearch () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #1 0x088dded5 in IDL_RBtreeSearch_ID () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #2 0x087c1031 in _IDL_enter_proc_name () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #3 0x087c2354 in sem_pro_callx () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #4 0x087c23de in _IDL_rul_pro_call_plist () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #5 0x088c5c56 in _IDL_parse () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #6 0x08748c24 in sparse () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #7 0x08748a92 in compile_stmt () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #8 0x08748b5c in _IDL_compile_single_stmt () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #9 0x08757b1e in IDL_Executive () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #10 0x08b3bb6b in IDL_ExecuteStr () from /lbt/lbc_runtime/idl81/idl81/bin/bin.linux.x86/libidl.so.8.1 #11 0x0809bb9b in IAActiveOptics (paod=0x972ec790) at src/trackers/ia.c:114 #12 0x08094c48 in TrackersExpose (arg=0xa088040) at src/trackers/trackers.c:1775 #13 0x001ddb39 in start_thread () from /lib/libpthread.so.0 #14 0x005d8d6e in clone () from /lib/libc.so.6
devices/Applicom....- update notes to include updates to
makefileif the driver is installed somewhere else
/lbton the new CMU for run time? like IDL license, convert program, sextractor
rsync'ed like MODS?
|the tracking code finds the FITS files in the repository dir|| verified 20141118, moved to
|guiding offsets are communicated to the TCS||verified 20141210|
| IA IDL code finds the FITS files in the
|focus corrections are communicated to the TCS||verified 20150928|
|STOP commands are handled correctly in the IDL|
|lbckill/start handles clean up and restart of IDL ok|
|the GUI shows the correct info when guiding/failed/done, including the GIF file||verified 20141210|
|check permissions if problems with the GUI files||verified 20150930|
||abandoned the Ice interface, not worth the effort|
makefileto TCS older version (called
tcsdir to backup
tcsdir (or copy from 2.02)
newdataand moved to
/var/log/messagesfor TCS complaints.
|1.|| Run the standalone programs to verify we're talking to the right systems, logging, etc.
||many tests can be performed - home devices, move to positions, ...|| verify no errors
verify power control
verify encoders are read correctly on filters and rotators
verify communication to TCS
verify communication to CCD controllers
|2.||Bring up the LBC software on the CMU||more notes here on full-up testing|
|3.||Turn on housekeeping -- verify it's reading red/blue temps and vacuum pressures correctly and logging|
|4.||Turn on other systems||verify power is enabled in the correct way|
|5.||Create OBs and play them - verify no complaints, FITS files are created, GUI updates,|
|6.||Bring up the web pages at lbccontrol - check the stuff listed here|
|7.||Before sky -- make sure all the config files match operational - telescope trajectories, debug, tracking time, etc.|
|8.||Sky testing. Use the notes here: LBC Quick Ref Wiki Page , LBC Science Prep Checklists|
/home/ksummers/lbc/BBB. The SkyTech test program is named
CTR-S100.outfrom the directory
17020 TRACKER image samples 3269 0.0 secs 13395 0.1 secs 206 0.2 64 0.3 18 0.4 19 0.5 9 0.6 4 0.7 10 0.8 5 0.9 only 20 of 17020 were >= 1.0 secsIn 3856 science images, the range went up to 8.5secs.
> Dear Christian,After telecon with Andrea when I was on the mountain with Fernando and Mauro in Aug-2013, I sent this:
> We would like to give you a short summary about a possible upgrade
> for the LBC camera control system. The goal is to make easier the
> architecture of the cameras changing the present
> SkyTech-optical-fiber-CCD-controller data link with a standard
> Ethernet connection.
>> This is realized changing one of the controller board with an evolved one
> where the optical interface is replaced by a standard Ethernet module
> and a local PIC microcontroller.
> This solution improves the data transfer efficiency towards the
> LBTO archive using the SD memory of the new controller boards as
> data buffer for the acquired images. So built in fits images can be
> sent directly to the LBTO archive without any interaction with the
> CMU or other PCs.
> Each CCD controller will have its own I.P. address for its
> identification in the instrument network. In this new configuration
> the 4 win PCs are obsolete and can be removed from the LBC PCs
> architecture leaving the CMU (1 Linux PC) as the only
> PC for LBC.
> We have already funded the project for the prototype development.
> Skytech has just delivered the Hardware and we are beginning to
> test the prototype in the second half of the year and we plan to
> complete the lab commissioning by the end of the year.
> Skytech could produce 4 (+1 spare) boards during the first semester
> 2014. The total cost is 25000 euros.
> If you agree with the funding and schedule of the upgrade, we are
> available for installation of the new hardware during the 2014
> summer stop.
> Concerning the PC architecture, this implies to operate with the
> present 4PC+CMU configuration until summer 2014.
> Emanuele, Andrea, Fernando
Ciao Fernando and Andrea, Thank you for the discussion this morning. I would like to make sure we all know what the status is and the next steps. Please let me know if any of this is incorrect. The status is that SkyTech is currently testing the new hardware. Fernando suggested they would be done by the end of 2013. I understand that there are a lot of outstanding issues to be determined, like the command set for the new DLL, image handling to the repository, tracking. These items should be worked out in the next few months. I would like to be included in some of that discussion, if possible. The next step is for INAF to produce a proposal to LBTO including the proposed hardware architecture (multiple NICs in single machine, CentOS machine?), the preliminary software architecture, resources required from INAF and LBTO, and proposed schedule. Does that sound reasonable? Ciao,But, we still have no proposal (11-Dec-2013).
|doc||602s201d.doc||manage||12 MB||20 Jul 2016 - 18:22||UnknownUser||CAN document 602s201 - July 2016 version|
|jpg||CCDControllerSoftwareArchitecture-BBB.jpg||manage||758 K||05 Aug 2016 - 16:24||UnknownUser||BBB software architecture|
|CTR-D2100_DS_0.00.pdf||manage||600 K||03 Dec 2014 - 23:22||UnknownUser||CTR_PROCEDURES Library shared object for CTR-A2100 software description|
|doc||CTR-D2100_DS_0.03.doc||manage||212 K||20 Jul 2016 - 17:44||UnknownUser||Updated CTR_PROCEDURES software description with error handling|
|jpg||LBCSoftwareArchitecture.jpg||manage||114 K||16 Jan 2014 - 23:13||UnknownUser||Software Architecture|
|txt||TripReportMay2016.txt||manage||4 K||20 Jul 2016 - 17:42||UnknownUser||Details of trip to La Spezia, testing|
|pc-purchase.pdf||manage||26 K||07 May 2013 - 18:14||UnknownUser||Initial PC purchase specifications|