MODS Mask Inventory *Note that if a location is not listed, then the assumed location is in the mask cabinet in rm 116. Mask ID A/B/C... Comments Location...
MODS Slit Masks The table below lists the slit masks loaded into the MODS1 and MODS2 slit mask cassettes. The slits may be selected by the maskID code listed (sel...
MODS Micro LYNX Motor Controllers This page reports the current status of the MODS Micro LYNX motor controllers. in response to problems that emerge. Record chang...
Log of LBC Twilight Sky Flats To flat field LBC images, twilight sky flats are needed; the enclosure is too compact and the surface too uneven to obtain useful do...
LUCI Mask Inventory *Note: If no location is listed, the assumed location is the mask cabinet in rm 116 Mask# A/B/C.. Comments Location Date of Last I...
MODS Focus Sequences MODS focus sequence scripts: There are 3 python scripts, one for imaging, one for grating and one for prism configurations, to create script...
* Using TAP to Search the Archive * How to Provide Observers Access to their Data (new Grouper) * How to Provide Observers Access to their Data (old Grouper...
LBC Lab Setup Instructions (Obsolete) Initial setup * It is assumed that the camera to be tested is ready (pumped and cold). * Set up LBC Lab Power Supply ...
MODS Calibration Lamp Change Log Fill out the table below every time you change a calibration lamp, regardless of whether it is an emergency replacement on telesc...
MODS Mask Exchange Procedure MODS has a multi slit mask cassette that accepts up to 24 masks mounted in special frames. The masks are laser cut in thin spherical...
Troubleshooting Procedures for MODS team and LBTO staff These procedures are documented for use by MODS team and LBTO staff. They were separated from the Troubles...
MODS: The Multi Object Double Spectrographs Overview MODS1 and MODS2 are UV to nearIR Multi Object Double Spectrgraphs that are mounted at the Direct Gregorian f...
MODS IMCS Collimator TTF Zero Point Calibration Procedure Overview The MODS Image Motion Compensation System (IMCS) nulls image motion on the CCD detectors due t...
MODS Post Shutdown Startup (Under construction!) The following is a procedure for restarting MODS1 or MODS2 after it is installed, hooked up and released to scien...
Mask Inventory The Mask Inventories are lists of all the masks cut and currently on the summit. The inventories list the Mask ID, any comments (such as if there a...
MODS agw.ini files and MODS AGw recommissioning This page describes the agw.ini files which are on the instrument server (mods1 and mods2) and are read by the agw...
LBC Troubleshooting Please feel free to update this page with any LBC troubleshooting notes or links as appropriate. Thanks! * Troubleshooting notes from the ...
Facility Instruments In the Event of a Power Outage Before computers are shutdown, ensure the instrument is in a safe state and shutdown processes. The following ...
Notes taken while troubleshooting Blue Filter Wheel 1 Error (IT 7294) Following are some notes which I have been collecting during the troubleshooting of IT 7294....
LBC WRS Image Analysis Software In April 2014, we started testing a replacement LBC active optics application for LBCFPIA (or DOFPIA) called WRS (or DOWRS). In Fe...
MODS Camera Focus (under construction) MODS focus sequences: * modsfoc.py can be used to create scripts that step through focus in grating mode * ./m...
MODS Focus Sequences (under construction) MODS focus sequences: * modsfoc.py can be used to create scripts that step through focus in grating mode * ....
LBC WRS Tech chip image analysis In February 2018, Marco sent a version of WRS for analyzing tech chip images. Analysis of tec chip images is now all done on the ...
To power off LN use the power switches described below: (You might hear a siren go off for 10 sec. when you turn the power on.) This additional information pro...