LUCIFER Reference Documentation

Operating LUCI

• Operating Manual
• LUCI Cookbook link
• LUCIFER Workstation Startup Procedure

LUCI Installation and Removal

• Procedure For Removing Lucifer From the Telescope
• Procedure For Installing Lucifer On the Telescope
• Procedure For Moving the Compressor Rack
• Handling Guide
• Recalibration of LUCI after installation on the telescope
• LUCICompletedProcedures

LUCI Warm Up and Cool Down

• Warm Up and Cool Down Manual
• Procedure For Warming and Repressurizing Lucifer
• Procedure For Pumping and Cooling Down Lucifer
• Cryostat Technical Description

LUCI Cabinet Exchange

• Procedure for Loading Masks and Installing a Cabinet in Aux Cryostat
• Procedure for Pumping and Cooling Aux Cryostat
• Procedure for Extracting an Old Cabinet and Installing a New Cabinet in LUCI
• Extracting an Old Cabinet and Installing a New Cabinet in LUCI - Flying Direct
• Extracting an Old Cabinet and Installing a New Cabinet in LUCI - Flying Behind
• Mask and cabinet exchange user manual
• Inspecting LUCI masks
• LUCI and MOD Mask Review
• Mask Inventory
• LUCI MOS Masks to be Installed at Next Cabinet Exchange

Troubleshooting

• Troubleshooting NX server
• Recovering FIREFOX functionality
• Emergency Procedures
• Accessing MOS Unit Testpoints and Proper Voltage Settings
• MOS Unit Test Points photo

Maintenance

• Maintenance Manual (obsolete)
• LUCIFER PM/Inspection Schedule (obsolete)
• Preventive Maintenance and Inspection Procedure I604s00137
• Preventive Maintenance Monitoring Spreadsheet
• LUCI1 configuration and Maintenance Log
• LUCI2 Configuration and Maintenance Log

Other Useful Documents & Notes

• Technical Software and Procedure Manual
• Data taken for linearization calibration
• Kai Polsterer's Thesis
• MOBIUS

• 09 May 2010 Swapped motor control board in MCE
• 31 May 2010 Installed AUX CRYO drive module No more spares!
• 06 July 2010 Cold heads and compressor serviced
• 30 November 2010 Swapped motor driver add-on module (on SMD3.3 in MCE). Same operation as 09 May 2010. IT 2463
• 31 March 2011 Changed voltage on M3 and M4 in MOS MCU electronics to 3.0V
• 26 July 2011 Cold heads exchanged
• 13-16 February 2012 Corrected problems with filter wheel and MOS limit switches; reinstalled detector SN25
• 07 September 2012 Calibration unit halogen lamps changed
• (INCOMPLETE)
• 23 March 2014 removed the drive screw and nut and cleaned it in the ultrasonic cleaner, replaced the robot rotator resolver with a matched stator-rotator pair (unpotted), replaced the robot translation resolver with a matched pair
• 23 June 2014 swapped in the SN8 Rocon board
• 26 June 2014 5V/20Am power supply in MCE Chassis swapped out
• 27 June 2014 Installed ground cable to bias board
• 23 July 2014 Loose screw in MOS grabber addressed. MOS spindle/bearings have also been exchanged.
• 31 July 2014 Aux cryostat resolvers and position switches were repaired
• 08 Aug 2014 Scroll pump for AUX1 replaced, power cables for both AUX1 & AUX2 replaced.
• 30 Jan 2015 Cold heads swapped
• 4 feb 2015 He Lines purged

• in commissioning phase, see Commissioning logs for details.

LUCI1 Completed Precedures

• 604s-109c_Lucifer_Removal_From_Telescope_130117.pdf: 17 January 2013 Record of Lucifer removal from telescope
• 604s-119a_Release_to_remove_Luci1_from_telescope_160129.pdf: 29 January 2016 Release to remove Luci1 from the telescope

LUCI2 Completed Procedures