W UNIT MOUNT.


W START UP. OK

Secondary Start up OK.

New Gui to control the hexapod using the OSS. This new system is UNDER TEST0.504
It will be good to order a new fibers.

RUNNING THE NEW HEXAPOD GUI

HEXAPOD NEW POSITIONS: [ 0.504, -1.980, -0.23,-183.01, 38, 0]
TESTING THE SYSTEM, THE TIP-TILT DOEN'T MOVE THE THIRD AXE.
THE SYSTEM IS POWER OFF AND THE W UNIT IS OFF.

pROBLEM HAS BEEN THE CONNECTOR OF THE CHANNEL 3 OF THE TT. TWO PINS (PIN WHITE AND YELLOW) IN THE EXTENSION OF THE CONNECTOR FROM THE BCU WERE OFF AND WELDED AGAIN. (THE CONNECTOR IS MOUNT IN THE COVER OF THE BCU47)

W ON AGAIN AT 18:30.


ALL THE SYSTEM WORKING.

-- JuanCarlosGuerra - 2009-10-01
Topic revision: r3 - 01 Oct 2009, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback