< WFS START UP OK.
>
> domenica notte (27 settembre) spegnimento del frigo. la temperatura dell'acqua tubone arriva a 32°C (plateau) nella notte di lunedi 28.

Changed:
<
< LOAD BOARD SET UP irtc_v7

Secondary start up. Ok.
>
> lunedi mattina: riavviato il frigo (MX e RB) ma il rateo di discesa della temperatura è basso (la temperatura resta sempre maggiore di 19°). le pompe sono messe in manuale.

Changed:
<
< IRTC bootstrap failed. Reboot of the pc and the controller.
>
> martedi 29: intervento dell'idraulico, che non trova danni slla macchina frigorifera. non nota mancanza di freon. intorno alle ore 13 si nota che la pompa del tubone non è del tutto spenta, anche se la rotazione è lentissima.

Changed:
<
<

BIN 2. DIGITAL PUPILS GENERATED.

>
> tolta corrente al blocco tubone (pompa e riscaldatore). la temperatura del frigo scende in breve tempo ai valori nominali.

Changed:
<
< The reference pupil is binned by 2.

400Hz.
bin 2
3l/D
>
> non identificato ancora il motivo del blocco. vedere il plot dei dati.

Changed:
<
< Autocenter and focus with the secondary to center the pupils.

Generate IntMat .
KL
153 modes.
5 frames.
2 cycles.
Optimized_2lamda

Acquire IntMat
4 iterations.
Loop speed 400
DISTURBANCE: CmdDist _20090929_100944, modes:153, KL, optimized_2lambda

DISTURBOIM <cmddist_20090929_100944>
type = <push-pull .>
PP param
Modes = < KL >
#Modes = <153>
Amp = <optimized_2lambda>
Note = <..............>

INTMATACQ <20090929_102529>
Pup = </bin2/20090928_221919>
Dist = <cmddist_20090929_100944>
Iteration = <4>
Loop speed = <400 Hz>
bin: <2>
Modul =<3 l/D>

analyse Intmat, running the analyse intmat.

REC <REc_20090929_102705>
intmatacq = <20090929_100944>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <looks good>
RIP THE SECONDARY CLOSING THE LOOP. time 10:17
SECOND RIP 10:22. SHAPE SAVED: flat_cloop_400modes.sav


TEst of the Rec_20090929_102705

good up to gain:0.5. slope rms:5e-2

Using the rec: 20090929_102705 to close the loop to compensate the tower tilt during the Acquire of the Intmat.

Acquire IntMat .
intMat_20090929_104026
KL
Cmddist_20090929_100944
Iter:4
loop:400
Rec cloop: 20090929_102705
gain vector:gain0.05

Analyse Intmat.

REC <REc_20090929_104220>
intmatacq = <20090929_104026>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <look good>
Test of the Rec: REc_20090929_104220

good up to gain 0.5. without disturbance.
Disturbance: oversampling 800Hz.

loop freq:800Hz
Bin:2
TT:3L/D
Dist:on
Phot:1000
Gain:0.8 stable.

BIN 2..... REC: REC_20090929_104220 FOR 153 MODES 3l/d,400Hz


CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube1.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<off / >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <700 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
stage <Activated>
Nota = <................>

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube3.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <off>
Dist =<off/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
Nota = <................>
Stage: <activated>

CLOOP <20090929_110544>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube4.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<OFF/ >
Gain = <0.3>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Stage <activated>
Phot = <6000> phot/subap

Nota = <................>

POINT OF BASELINE TABLE ...... BIN 2...........


Stage control OFF.

CLOOP <20090929_111332>
<20090929_111418>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube6.fits>
<cube7.fits>
IRTC dark = <cube8.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_overfreq800_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 160> ph
Stage : <OFF>
RON TEST:5.7
Nota: ?? check.
BCU 39 failed

CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>

CLOOP <>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube12.fits>
cube13.fit
IRTC dark = <cube14.fit>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_ovfreq800_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 1000> ph
Stage : <OFF>

Nota: < seeing limited......>


CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000>
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < strelh: 56%>
BASELINE TABLE FOR...... BIN 2........
THE NEW GUI OPTICAL LOOP DIAG. SAVED THE IRTC IMAGES OR CUBE, THOSE IMAGES ARE SAVED AS TRACK NUMBER IRTC.fits
RIP THE SECONDARY after cloosing the loop . For mistakes it has been activated a slope null vector.

** flux:34 phot/subap. freq: 625hZ, tt: 3L/D


CLOOP <20090929_180613>
20090929_180729
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<off/ >
Gain = <0.4>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 44>
Stage : <OFF>

Nota: < the lamp is 15%

CLOOP <20090929_180940>
<20090929_181048>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50
FW2 = <800 / ..... >
Phot = <aprox 44>
Stage : <OFF>

CLOOP <20090929_181544>
<20090929_181650>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<c>
Gain = <0.7>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <50-50 / ..... >
Phot = <aprox 26>
Stage : <OFF>

Nota: lamp 14%

CLOOP <20090929_182631>
<20090929_182743>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

CLOOP <20090929_182427>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<>
Gain = <0.1>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

CLOOP <20090929_182631>
<20090929_182743>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

CLOOP <20090929_184207>
Bin = <2>
LoopHz = <550>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved. the irtc cube doesn't show any psf





-- JuanCarlosGuerra - 2009-09-29
>
>
-- JuanCarlosGuerra - 2009-09-29
\ No newline at end of file
Revision 42009-10-02 - JuanCarlosGuerra
Line: 1 to 1

META TOPICPARENT name="TowerLab"
WFS START UP OK.
Line: 47 to 47
CLOOP <20090929_111332>
<20090929_111418>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube6.fits>
<cube7.fits>
IRTC dark = <cube8.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_overfreq800_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 160> ph
Stage : <OFF>
RON TEST:5.7
Nota: ?? check.
BCU 39 failed
Changed:
<
< CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>
>
> CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>
CLOOP <>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube12.fits>
cube13.fit
IRTC dark = <cube14.fit>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_ovfreq800_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 1000> ph
Stage : <OFF>

Nota: < seeing limited......>
Changed:
<
<
CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000> ph
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < seeing limited......strelh: 56%>
>
>
CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000> ph
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < strelh: 56%>

BASELINE TABLE FOR...... BIN 2........
THE NEW GUI OPTICAL LOOP DIAG. SAVED THE IRTC IMAGES OR CUBE, THOSE IMAGES ARE SAVED AS TRACK NUMBER IRTC.fits
RIP THE SECONDARY after cloosing the loop . For mistakes it has been activated a slope null vector.
Line: 61 to 61
CLOOP <20090929_180940>
<20090929_181048>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50
FW2 = <800 / ..... >
Phot = <aprox 44>
Stage : <OFF>
Changed:
<
< CLOOP <20090929_181544>
<20090929_181650>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<c
>
> CLOOP <20090929_181544>
<20090929_181650>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<c>
Gain = <0.7>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <50-50 / ..... >
Phot = <aprox 26>
Stage : <OFF>

Nota: lamp 14%
CLOOP <20090929_182631>
<20090929_182743>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%
Deleted:
<
< >
Gain = <0.7>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <50-50 / ..... >
Phot = <aprox 26>
Stage : <OFF>

Nota: lamp 14%
CLOOP <20090929_182427>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<>
Gain = <0.1>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%
Line: 81 to 79
CLOOP <20090929_184207>
Bin = <2>
LoopHz = <550>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>
Changed:
<
< Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved. the irtc cube doesn't show any
>
> Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved. the irtc cube doesn't show any psf




-- JuanCarlosGuerra - 2009-09-29
Revision 32009-09-30 - JuanCarlosGuerra
Line: 1 to 1

META TOPICPARENT name="TowerLab"
WFS START UP OK.
Line: 6 to 6
IRTC bootstrap failed. Reboot of the pc and the controller.
Changed:
<
<
BIN 2. DIGITAL PUPIL GENERATED.
>
>
BIN 2. DIGITAL PUPILS GENERATED.
The reference pupil is binned by 2.

400Hz.
bin 2
3l/D
Line: 14 to 14
Acquire IntMat
4 iterations.
Loop speed 400
Changed:
<
< INTMATACQ <20090929_102529>
Pup = <20090929_221919>
Dist = <cmddist_20090929_100944>
Iteration = <4>
Loop speed = <400 Hz>
bin: <2>
Modul =<3 l/D>
>
> DISTURBOIM <cmddist_20090929_100944>
type = <push-pull .>
PP param
Modes = < KL >
#Modes = <153>
Amp = <optimized_2lambda>
Note = <..............>

INTMATACQ <20090929_102529>
Pup = </bin2/20090928_221919>
Dist = <cmddist_20090929_100944>
Iteration = <4>
Loop speed = <400 Hz>
bin: <2>
Modul =<3 l/D>
analyse Intmat, running the analyse intmat.
Changed:
<
< REC <REc_20090929_102705>
intmatacq = <20090929_100944>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <look good>
>
> REC <REc_20090929_102705>
intmatacq = <20090929_100944>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <looks good>
RIP THE SECONDARY CLOSING THE LOOP. time 10:17
SECOND RIP 10:22. SHAPE SAVED: flat_cloop_400modes.sav


TEst of the Rec_20090929_102705

< good up to gain:0.5. slope rms:5e-2

Using the rec: 20090929_102705 to close the loop to compensate the tower tilt during the Acquire of the Intmat.

> good up to gain:0.5. slope rms:5e-2

Using the rec: 20090929_102705 to close the loop to compensate the tower tilt during the Acquire of the Intmat.


Acquire IntMat .
intMat_20090929_104026
KL
Cmddist_20090929_100944
Iter:4
loop:400
Rec cloop: 20090929_102705
gain vector:gain0.05
Line: 33 to 35

Test of the Rec: REc_20090929_104220

good up to gain 0.5. without disturbance.
Disturbance: oversampling 800Hz.

loop freq:800Hz
Bin:2
TT:3L/D
Dist:on
Phot:1000
Gain:0.8 stable.

BIN 2..... REC: REC_20090929_104220 FOR 153 MODES 3l/d,800Hz

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube1.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<off / >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <700 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
stage <Activated>
Nota = <................>

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube3.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <off>
Dist =<off/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
Nota = <................>
Stage: <activated>

CLOOP <20090929_110544>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube4.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<OFF/ >
Gain = <0.3>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Stage <activated>
Phot = <6000> phot/subap

CLOOP <20090929_184207>
Bin = <2>
LoopHz = <550>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

< Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved.
>
> Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved. the irtc cube doesn't show any




-- JuanCarlosGuerra - 2009-09-29
Revision 22009-09-29 - JuanCarlosGuerra
Line: 1 to 1

META TOPICPARENT name="TowerLab"
WFS START UP OK.
Line: 35 to 35
good up to gain 0.5. without disturbance.
Disturbance: oversampling 800Hz.

loop freq:800Hz
Bin:2
TT:3L/D
Dist:on
Phot:1000
Gain:0.8 stable.

BIN 2..... REC: REC_20090929_104220
Changed:
<
< CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube1.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<tracking# / >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <700 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
stage <Activated>
Nota = <................>

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube3.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<off/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
Nota = <................>
Stage: <activated>

CLOOP <20090929_110544>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube4.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<OFF/ >
Gain = <0.3>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Stage <activated>
Phot = <6000> phot/subap
>
> CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube1.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<off / >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <700 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
stage <Activated>
Nota = <................>

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube3.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <off>
Dist =<off/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
Nota = <................>
Stage: <activated>

CLOOP <20090929_110544>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube4.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<OFF/ >
Gain = <0.3>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Stage <activated>
Phot = <6000> phot/subap
Nota = <................>
Changed:
<
<
THIRD POINT OF BASELINE TABLE
>
>
POINT OF BASELINE TABLE ...... BIN 2...........
Stage control OFF.
Changed:
<
< CLOOP <20090929_111332>
<20090929_111418>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube6.fits>
<cube7.fits>
IRTC dark = <cube8.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_overfreq800_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 160> ph
Stage : <OFF>
RON TEST:5.7
Nota: this seems that the disturbance it was not running.
>
> CLOOP <20090929_111332>
<20090929_111418>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube6.fits>
<cube7.fits>
IRTC dark = <cube8.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_overfreq800_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 160> ph
Stage : <OFF>
RON TEST:5.7
Nota: ?? check.

BCU 39 failed
Changed:
<
< CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>
>
> CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>

Changed:
<
< CLOOP <>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube12.fits>
cube13.fit
IRTC dark = <cube14.fit>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_ovfreq800_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 1000> ph
Stage : <OFF>

Nota: < l......>
>
> CLOOP <>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube12.fits>
cube13.fit
IRTC dark = <cube14.fit>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_ovfreq800_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 1000> ph
Stage : <OFF>

Nota: < seeing limited......>

Changed:
<
<
CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000> ph
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < seeing limited......strelh: 56%>
>
>
CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000> ph
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < seeing limited......strelh: 56%>
BASELINE TABLE FOR...... BIN 2........
THE NEW GUI OPTICAL LOOP DIAG. SAVED THE IRTC IMAGES OR CUBE, THOSE IMAGES ARE SAVED AS TRACK NUMBER IRTC.fits
RIP THE SECONDARY after cloosing the loop . For mistakes it has been activated a slope null vector.
** flux:34 phot/subap. freq: 625hZ, tt: 3L/D

Changed:
<
< -- JuanCarlosGuerra - 2009-09-29
>
> CLOOP <20090929_180613>
20090929_180729
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<off/ >
Gain = <0.4>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 44>
Stage : <OFF>

Nota: < the lamp is 15%

CLOOP <20090929_180940>
<20090929_181048>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50
FW2 = <800 / ..... >
Phot = <aprox 44>
Stage : <OFF>

CLOOP <20090929_181544>
<20090929_181650>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<c

CLOOP <20090929_182631>
<20090929_182743>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

>
Gain = <0.7>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <50-50 / ..... >
Phot = <aprox 26>
Stage : <OFF>

Nota: lamp 14%

CLOOP <20090929_182427>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<>
Gain = <0.1>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

CLOOP <20090929_182631>
<20090929_182743>
Bin = <2>
LoopHz = <400>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%

CLOOP <20090929_184207>
Bin = <2>
LoopHz = <550>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits >
Gain = <0.6>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <50-50 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 20>
Stage : <OFF>

Nota: lamp 13%, secondary rip ...but it showed that the optical loop diagonstic was saved.





-- JuanCarlosGuerra - 2009-09-29
Revision 12009-09-29 - JuanCarlosGuerra
Line: 1 to 1
Added:
>
>
META TOPICPARENT name="TowerLab"
WFS START UP OK.

LOAD BOARD SET UP irtc_v7

Secondary start up. Ok.

IRTC bootstrap failed. Reboot of the pc and the controller.

BIN 2. DIGITAL PUPIL GENERATED.

The reference pupil is binned by 2.

400Hz.
bin 2
3l/D

Autocenter and focus with the secondary to center the pupils.

Generate IntMat .
KL
153 modes.
5 frames.
2 cycles.
Optimized_2lamda

Acquire IntMat
4 iterations.
Loop speed 400

INTMATACQ <20090929_102529>
Pup = <20090929_221919>
Dist = <cmddist_20090929_100944>
Iteration = <4>
Loop speed = <400 Hz>
bin: <2>
Modul =<3 l/D>

analyse Intmat, running the analyse intmat.

REC <REc_20090929_102705>
intmatacq = <20090929_100944>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <look good>
RIP THE SECONDARY CLOSING THE LOOP. time 10:17

SECOND RIP 10:22. SHAPE SAVED: flat_cloop_400modes.sav

TEst of the Rec_20090929_102705

good up to gain:0.5. slope rms:5e-2

Using the rec: 20090929_102705 to close the loop to compensate the tower tilt during the Acquire of the Intmat.

Acquire IntMat .
intMat_20090929_104026
KL
Cmddist_20090929_100944
Iter:4
loop:400
Rec cloop: 20090929_102705
gain vector:gain0.05

Analyse Intmat.

REC <REc_20090929_104220>
intmatacq = <20090929_104026>
Modal Basis: KL
n modes = <153>
cutted = <1>
Note: <look good>
Test of the Rec: REc_20090929_104220

good up to gain 0.5. without disturbance.
Disturbance: oversampling 800Hz.

loop freq:800Hz
Bin:2
TT:3L/D
Dist:on
Phot:1000
Gain:0.8 stable.

BIN 2..... REC: REC_20090929_104220

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube1.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<tracking# / >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <700 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
stage <Activated>
Nota = <................>

CLOOP <20090929_105717>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube3.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<off/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <6000> phot/subap
Nota = <................>
Stage: <activated>

CLOOP <20090929_110544>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube4.fits>
IRTC dark = <cube2.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<OFF/ >
Gain = <0.3>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Stage <activated>
Phot = <6000> phot/subap

Nota = <................>
THIRD POINT OF BASELINE TABLE

Stage control OFF.

CLOOP <20090929_111332>
<20090929_111418>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube6.fits>
<cube7.fits>
IRTC dark = <cube8.fits>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_overfreq800_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 160> ph
Stage : <OFF>
RON TEST:5.7
Nota: this seems that the disturbance it was not running.
BCU 39 failed

CLOOP <20090929_114100>
<20090929_114144>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube9.fits>
<cube10.fits>
IRTC dark = <cube11.fits>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 90> ph
Stage : <OFF>
Ron test: 4.0
Nota: < lamp 5%......>

CLOOP <>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube12.fits>
cube13.fit
IRTC dark = <cube14.fit>
Bin = <2>
LoopHz = <800>
Pup = <tracking#>
Dist =<_ovfreq800_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 1000> ph
Stage : <OFF>

Nota: < l......>


CLOOP <_>
<>
IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube15.fits>
cube16.fit
IRTC dark = <cube17.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.0>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 3000> ph
Stage : <OFF>

Nota: < seeing limited....disturbance 65..>

CLOOP <20090929_121418>

IRTC saved: R/IRTC_Data/20090929094823/
IRTC cube = <cube18.fits>
cube19.fit
IRTC dark = <cube20.fit>
Bin = <2>
LoopHz = <625>
Pup = <tracking#>
Dist =<_ovfreq625_np4000.fits/ >
Gain = <0.8>
Rec = <REc_20090929_104220>
SN = < zero
FW1 = <600 / ...>
FW2 = <800-40 / ..... >
Phot = <aprox 7000> ph
Stage : <OFF>

Nota: < seeing limited......strelh: 56%>

-- JuanCarlosGuerra - 2009-09

-- JuanCarlosGuerra - 2009-10-06
Topic revision: r4 - 06 Oct 2009, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback