TEST BIN 2

Enrico JCarlos

/towerdata/adsec_data/20090713

FOLLOWING THE SOLAR TOWER BASELINE TABLE.

Mr bin Hz T(ms) Ttot
Ttot photons-subap-frame
RON nmodes mod(+-L/D) g %SR(simul) %SR(simul+TS)
10.5 2 800 1.25 2T 166 8.5 153 3 0.9 61 50
11.5 2 625 1.6 2T 84 5.1 153 3 0.9 59 48

CLOSE LOOP TEST punto mag 11.5 delle baseline in torre secondo FLAO_01

board set up torre 10_bin2
Board setup che comprende la corretta posizione della camera lens per
le pup del bin2 20090710-154016


ccd39 RON test:
bin2 380 600Hz 6.35e-

CLOOP 115021 Test ad alto flusso
PSF1.fits
Bin = 2
Hz = 625
39Readspeed = 380 kpix/s con RON 6.35e-
Mod = +-3.0 l/D
Pup = 20090710-154016
ccd47 average: 50 frames
ccd47 0.4Hz
Dist = NO
Gain = 0.3
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 2400/subap
Nota = fwhm 1.38 l/D; peak 1700; peak/en = 0.053

CLOOP 115541 MISURA DEL DISTURBO
PSF2.fits

Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 average: 100 frames
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.0
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 2400/subap
Nota = La psf a occhio sul signolo frame non si vede....

CLOOP 120039 Correzione ad alto flusso
PSF3.fits

Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 average: 50 frames
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.3
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 2400/subap
Nota =fwhm 2.5 l/D; peak 120; peak/en 0.016
Abbassiamo la lampada e cerchiamo di fare il punto a mag 10.5 ma a625 invece che a 800Hz

CLOOP 124637 Senza dist
PSF4.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 average: 50 frames
ccd47 0.4Hz
Dist = No dist
Gain = 0.3
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 160/subap
Nota =fwhm 1.33 l/D; peak/en 0.0573

Breve ottimizz gain guardando le slopes RMS

CLOOP 125125 con dist
PSF5.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 average: 100 frames
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 160/subap
Nota =fwhm XXXX l/D; peak/en XXXX.... The psf can not be seen in the image, impossible to do the analysis

CLOOP 132150 dist
PSF6.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 average: 500 frames
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 160/subap
Nota =fwhm XXXX l/D; peak/en XXXX. PSF can not be seein in the image

CLOOP 132543 dist
PSF7.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 Sequence
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 160/subap
Nota =fwhm XXXX l/D; peak/en XXXX

  • Summary of results:
    13072009_bin2_var_mr10.5.jpeg
CAMBIATO IL METODO DI ACQUISIRE IL DARK DEL 47 ora sposta il cubo e non le slitte
RISOLTO IL BACO ACQUISIZIONE DATALOOP e dovrebbe acquisire anchew modi e comandi

CLOOP 142235 dist
PSF8.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 50 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 180/subap
Nota =fwhm XXXX l/D; peak/en XXXX.... Check the image, the psf is in the image but the window has to be changed.

CLOOP 142235 dist
PSF9.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 180/subap
Nota =fwhm XXXX l/D; peak/en XXXX

CLOOP 144458 dist
PSF10.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 500 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 180/subap
Nota =fwhm XXXX l/D; peak/en XXXX Si vede qualcosa ma Pochissimi conteggi

Alfio aggiorna il viewer con il contatore per quadrante che media nel tempo

Abbassiamo ancora la lamp a 80phot/sub

Acquisizione dark47

CLOOP 153346 80phot no disturb
PSF11.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 average
ccd47 0.4Hz
Dist = no
Gain = 0.4
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 80/subap
Nota : La psf c'e', si fittama male, darebbe 1.1 l/D e 0.083 ma e'un evidente errore di fit

Acquisizione dark47

CLOOP 154717 e 1555658 - 80phot CON disturb
PSF12.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 80/subap
Nota :il fondo sale durante l'acquisizione della PSF

  • mirror modes' modal variance. Binning2, mag 11.5:
    13072009_bin2_var_mr11.5.jpeg
Rialziamo la lampada per misurare la psf del disturboe recheck cloop

CLOOP 161409 - PSF seeing limited con mirror! e 850-10
PSF13.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.0
Rec = 162517 (153modes)
SN = zero
FW1 = mirror
FW2 = 850-10
Phot = 3000/subap col dicroico, poi con il mirror 0....
Nota :PSF fwhm 38 l/D; peak 406; peak/energy = 7e-5

Acquisizione dark

CLOOP 162306 - PSF seeing limited con mirror! e 900-10
PSF14.fits e psf15.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 100 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.0
Rec = 162517 (153modes)
SN = zero
FW1 = mirror
FW2 = 900-10
Phot = 3000/subap col dicroico, poi con il mirror 0....
Nota :molto piu' debole della 850-10,there is an affect in the image (tail) in the psf.

TEST CLOOP alto flusso

CLOOP 165202 - no distrub
PSF16.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 50 average
ccd47 0.4Hz
Dist = NO
Gain = 0.3
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 2800/subap
Nota :fwhm 1.36 l/D;peak 1200; peak/en = 0,054

CLOOP 165530 - CON distrub
PSF17.fits
Bin = 2
Hz = 625
Mod = +-3.0 l/D
39Readspeed = 380 kpix/s con RON 6.35e-
Pup = 20090710-154016
ccd47 : 50 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.3
Rec = 162517 (153modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 2600/subap
Nota :fwhm 1.78 l/D;peak 92; peak/en = 0.033


BIN 3

To performing the binning 3 is better to start the procedure with a mirror flat, this is done using the binning 2 and close the loop.
Save shapes:flat_2009_07_13_172220.sav

ACQPUPIL 20090713-171129
mettiamo a mano il TT a 200Hz con 8V mod per avere massima ampiezza.
Nsubap = 78.

INTMAT ACQUISITION
Generate disturbance. CmdDist _20090713_180225.fits
NModes:400
Frames/movements:5
PP cycles:2
Amplitude file:pp_400m_b3_ccd200_tt6.fits

*Acquire:Intmat_20090713_180251
Iteraction:4

*Reconstractor Rec_20090713_180550
Nmodes used:67.

TEST CLOSE LOOP OF THE REC. Rec_20090713_180550
GAIN:0.5 start to oscillate. without Dist.

CLOOP 181646 - no distrub - HIGH FLUX
PSF18.fits
Bin = 3
Hz = 200
Mod = +-6.0 l/D
39Readspeed = 150 kpix/s con RON 6.35e-
Pup = 20090713-171129
ccd47 : 50 average
ccd47 0.4Hz
Dist = NO
Gain = 0.4
Rec = 180550 (67modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 6000/subap
Nota :fwhm 1.35 l/D;peak 325; peak/en = 0,056

CLOOP 182317 - CON distrub - HIGH FLUX
PSF19.fits
Bin = 3
Hz = 200
Mod = +-6.0 l/D
39Readspeed = 150 kpix/s con RON 6.35e-
Pup = 20090713-171129
ccd47 : 100 average
ccd47 0.4Hz
Dist = dist_atmo_08_1000Hz_15ms_s35_80pix.fits
Gain = 0.6
Rec = _180550 (67modes)
SN = zero
FW1 = 600 dicr
FW2 = 850-10
Phot = 6000/subap
Nota :NO SE VEDE LA PSF.


INTMAT 400 MODES to check the conditioning number

INTMAT 20090713_110833

-- JuanCarlosGuerra - 2009-07-13
I Attachment Action Size Date Who Comment
13072009_bin2_var_mr10.5.jpegjpeg 13072009_bin2_var_mr10.5.jpeg manage 82 K 13 Jul 2009 - 13:07 UnknownUser mirror modes' modal variance binning2 mag10.5 13072009
13072009_bin2_var_mr11.5.jpegjpeg 13072009_bin2_var_mr11.5.jpeg manage 78 K 13 Jul 2009 - 14:17 UnknownUser mirror modes' modal variance. Binning2, mag 11.5
Topic revision: r12 - 14 Jul 2009, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback