BIN 2,3,4.

Acquire sinusoidal measurements at 600 modes freq 30Hz.

System start: torre 10.
flat:flat_2009_05_18_154957.fits.

Working on the circle pupil procedure.

System start up with fault in the secondary. After restart on the WFS the secondary went RIP. This is due at the stop process from the WFS that kill some process in the secondary. This is fault is on hand. to recover the system was necessary to restart the secondary and start the WFS.

Moving the camare lens to refine the pupils at binning 2. This configuration is saved in the load configuration file. TORRE10_BIN2.

-- JuanCarlosGuerra - 2009-06-26
Topic revision: r1 - 26 Jun 2009, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback