Unit B: 29 Ago 2011, Telescope Activity Log

• Installation of Mirror Unit B on the telescope (SX side)
• Connection to Power (from Robert's information)
  • Three-phase 208V: Panel 62A, Breaker #13,15,17
  • Single-phase 120V: Panel 62C Breaker #4
• Connection of fibers in the cabinet (connected following Joe's schematics):
  • Bundle-1 fiber pair Blue/Orange (Net-1) in the Trunk port of the Cisco Ethernet Port
  • Bundle-1 fiber pair Slate/White (Trig-1), fiber Slate in the trigger port of the BCU-Switch board
  • Bundle-2 fiber pair Blue/Orange (Fastlink-1) to In1 port of the BCU-Switch board (FLAO slopes)
  • Bundle-3 fiber pair Blue/Orange (Fastlink-3) to out1 port of the BCU-Switch board (LBTI slopes)
  • Bundle-3 fiber pair Green/Brown (Fastlink-4) to in2 port of the Switch-BCU board (ARGOS slopes)