-- RunaBriguglio - 04 Jul 2011

Test using opencloseao

loop closed with binning 1, freq 312, mod 3

first closeloop: 13:56:44.349963| MAIN > Executing command: errcode = fsm_run_ao(312, 0, 0.00150602)

acq opencloseao launched: 13:57:49.781012| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.0107527)

it appears that the loop parameters have been changed.

the shell ripped after 4/5 open close

THE TEST IS LEADING TO NOWHERE, WE DECIDE TO CHANGE STRATEGY AND VERIFY OLD SwBCU

SwBCU replace: old one re-installed

2011-07-04 15:33:49.173677| MAIN > fsm_power_on()

shell set

loop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed 15:46:53.997833| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose

idlctrl.R |INF| 97809|2011-07-04 15:47:48.523646| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 97810|2011-07-04 15:47:48.525712| MAIN > fsm_stop_ao start
idlctrl.R |INF| 97811|2011-07-04 15:47:48.525771| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 97812|2011-07-04 15:47:48.525809| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 97813|2011-07-04 15:47:48.525850| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 97814|2011-07-04 15:47:48.525889| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 97815|2011-07-04 15:47:48.525929| MAIN > -1009

mirrorctrl.R |ERR| 46893|2011-07-04 15:47:48.525314| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 46894|2011-07-04 15:47:48.525373| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 46895|2011-07-04 15:47:48.839993| MAIN > *******
FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

LBTI fiber disconnected

test_skip_frame.pro modified, to avoid switch bcu reset at failure

shell set again

oop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed: 2011-07-04 16:37:43.552923| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose

idlctrl.R |INF| 98813|2011-07-04 16:38:09.208328| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 98814|2011-07-04 16:38:09.210919| MAIN > fsm_stop_ao start
idlctrl.R |INF| 98815|2011-07-04 16:38:09.210971| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 98816|2011-07-04 16:38:09.211021| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 98817|2011-07-04 16:38:09.211071| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 98818|2011-07-04 16:38:09.211124| MAIN > % READ_SEQ: READING ERROR BCU

mirrorctrl.R |ERR| 46940|2011-07-04 16:38:09.210526| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 46941|2011-07-04 16:38:09.210580| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile

SwitchBCU replaced: AdSec672b one installed

shell set

shell set again

oop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed: 17:18:08.505208| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose:

17:18:36.290053| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 100248|2011-07-04 17:18:36.292287| MAIN > fsm_stop_ao start
idlctrl.R |INF| 100249|2011-07-04 17:18:36.292363| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 100250|2011-07-04 17:18:36.292423| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 100251|2011-07-04 17:18:36.292485| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 100252|2011-07-04 17:18:36.292544| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 100253|2011-07-04 17:18:36.292601| MAIN > -1009

mirrorctrl.R |ERR| 47883|2011-07-04 17:18:36.291931| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47884|2011-07-04 17:18:36.291993| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 47885|2011-07-04 17:18:36.407620| MAIN > *******
FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

Test of manual close-open loop

idlctrl.R |INF| 101244|2011-07-04 18:03:57.987889| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 101245|2011-07-04 18:03:58.997115| MAIN > fsm_run_ao() start
idlctrl.R |INF| 101246|2011-07-04 18:03:58.997203| MAIN > fsm_run_ao() end
idlctrl.R |INF| 101247|2011-07-04 18:03:58.997258| MAIN > 0
idlctrl.R |INF| 101248|2011-07-04 18:04:05.514582| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode

idlctrl.R |INF| 101279|2011-07-04 18:04:23.939167| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 101280|2011-07-04 18:04:24.945944| MAIN > fsm_run_ao() start
idlctrl.R |INF| 101281|2011-07-04 18:04:24.946021| MAIN > fsm_run_ao() end
idlctrl.R |INF| 101282|2011-07-04 18:04:24.946086| MAIN > 0
idlctrl.R |INF| 101283|2011-07-04 18:04:30.326284| MAIN > Executing command: print,test_demo_mode()
idlctrl.R |INF| 101284|2011-07-04 18:04:30.326537| MAIN > IDL license file is running.
idlctrl.R |INF| 101285|2011-07-04 18:04:30.326589| MAIN > 0
idlctrl.R |INF| 101286|2011-07-04 18:04:30.885609| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 101287|2011-07-04 18:04:30.888003| MAIN > fsm_stop_ao start

mirrorctrl.R |ERR| 47930|2011-07-04 18:03:59.316547| MAIN > ****** FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47931|2011-07-04 18:03:59.316615| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47932|2011-07-04 18:03:59.316678| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47933|2011-07-04 18:03:59.316715| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47934|2011-07-04 18:03:59.316765| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47935|2011-07-04 18:03:59.316812| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 47936|2011-07-04 18:03:59.316856| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile


mirrorctrl.R |ERR| 47937|2011-07-04 18:04:30.887650| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

From:"wfsarb.R@M_FLAOWFS" To:"adsecarb.R" Code:014000 pLoad:2015

acq openclose with OVS

18:14:43.604651| MAIN > Executing command: errcode = fsm_run_ao(200, 0, 0.00119048) etc etc the shell doe not rip

acq openclose without OVS

18:16:09.914052| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) etc etc the shell doe not rip

acq openclose without OVS

18:20:26.777986| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) no rip

18:26:48.531000| MAIN > Executing command: errcode = fsm_run_ao(850, 1, 0.00116279) no RIP

18:29:30.882195| MAIN > Executing command: errcode = fsm_run_ao(900, 1, 0.00116279) no RIP but the shell has a strange shape

18:35:12.121634| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279)nop RIP

19:01:30.108366| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279) No RIP the flat shape was lost at the end of the test (iteration 8 or 9 out of 10

idlctrl.R |INF| 104460|2011-07-04 19:02:58.702229| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279)

19:02:59.817292| MAIN > ****** FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47984|2011-07-04 19:02:59.817351| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47985|2011-07-04 19:02:59.817403| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47986|2011-07-04 19:02:59.817442| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47987|2011-07-04 19:02:59.817486| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47988|2011-07-04 19:02:59.817528| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *****

pending are increasing

19:08:27.344104| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279) no RIP

19:12:40.995848| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP!

idlctrl.R |INF| 105663|2011-07-04 19:13:13.155889| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode

mirrorctrl.R |ERR| 47990|2011-07-04 19:13:13.157416| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

master dump=ADAPTIVE-SECONDARY-DIAGNVARS_00001309806797_20110704_191317.sav

19:19:31.464443| MAIN > Executing command: errcode = fsm_run_ao(975, 1, 0.00116279) no RIP

19:22:28.334038| MAIN > Executing command: errcode = fsm_run_ao(975, 1, 0.00116279) no RIP

19:26:15.788896| MAIN > Executing command: errcode = fsm_run_ao(980, 1, 0.00116279) RIP!!!

idlctrl.R |INF| 107251|2011-07-04 19:26:46.078672| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 107252|2011-07-04 19:26:46.080781| MAIN > fsm_stop_ao start
idlctrl.R |INF| 107253|2011-07-04 19:26:46.080835| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 107254|2011-07-04 19:26:46.080889| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 107255|2011-07-04 19:26:46.080954| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 107256|2011-07-04 19:26:46.081017| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 107257|2011-07-04 19:26:46.081067| MAIN > -1009

mirrorctrl.R |ERR| 48037|2011-07-04 19:26:46.080358| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

19:30:35.247534| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

19:33:24.132376| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) shell shape lost no RIP

mirrorctrl.R |ERR| 48084|2011-07-04 19:34:12.216661| MAIN > ****** FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48085|2011-07-04 19:34:12.216749| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48086|2011-07-04 19:34:12.216790| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48087|2011-07-04 19:34:12.216862| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48088|2011-07-04 19:34:12.216949| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48089|2011-07-04 19:34:12.217020| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48090|2011-07-04 19:34:12.217061| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 48084|2011-07-04 19:34:12.216661| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48085|2011-07-04 19:34:12.216749| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48086|2011-07-04 19:34:12.216790| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48087|2011-07-04 19:34:12.216862| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48088|2011-07-04 19:34:12.216949| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48089|2011-07-04 19:34:12.217020| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA *****

19:36:07.293806| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

mirrorctrl.R |ERR| 48091|2011-07-04 19:41:57.536844| MAIN > ****** FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48092|2011-07-04 19:41:57.536907| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48093|2011-07-04 19:41:57.536943| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48094|2011-07-04 19:41:57.536987| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48095|2011-07-04 19:41:57.537025| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48096|2011-07-04 19:41:57.537058| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48097|2011-07-04 19:41:57.537099| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 48091|2011-07-04 19:41:57.536844| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48092|2011-07-04 19:41:57.536907| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48093|2011-07-04 19:41:57.536943| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48094|2011-07-04 19:41:57.536987| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48095|2011-07-04 19:41:57.537025| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48096|2011-07-04 19:41:57.537058| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *****

19:45:10.654650| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

19:53:48.220415| MAIN > Executing command: errcode = fsm_run_ao(979, 1, 0.00116279) RIP!!!

mirrorctrl.R |ERR| 48098|2011-07-04 19:54:03.255566| MAIN > ****** FAILED PACKET FROM BCU 2 *****

19:47:36.562252| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP: the loast shape is not connected with the crates timeout ca, also the offload selector switches correctly between the two banks

start_acc commented

idlctrl.R |INF| 112141|2011-07-04 20:16:29.625652| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

mirrorctrl.R |ERR| 48146|2011-07-04 20:18:48.409148| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

20:28:52.197335| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

mirrorctrl.R |ERR| 48193|2011-07-04 20:29:00.698304| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 48194|2011-07-04 20:29:00.698363| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile

just changing the variable slopecmptr.R.fastlink_enable.req (0 or 1) in order to minimize the "activity" on the switch-bcu

20:38:03.698631| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

mirrorctrl.R |ERR| 48268|2011-07-04 20:29:55.667495| MAIN > ****** FAILED PACKET FROM BCU 2 *****

Again test with openclose

2011-07-04 21:47:06.305013| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279)

No rip


2011-07-04 21:54:21.779580| MAIN > Executing command: errcode = fsm_run_ao(978, 1, 0.00116279)

2011-07-04 21:55:16.124542| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
2011-07-04 21:55:17.639869| MAIN > ****** FAILED PACKET FROM BCU 2 *****


idlctrl.R |INF| 116309|2011-07-04 22:02:25.779979| MAIN > Executing command: errcode = fsm_run_ao(978, 1, 0.00116279)

mirrorctrl.R |ERR| 48432|2011-07-04 21:56:03.030118| MAIN > ****** FAILED PACKET FROM BCU 2 *****


idlctrl.R |INF| 117403|2011-07-04 22:25:08.937268| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP


idlctrl.R |INF| 117898|2011-07-04 22:30:39.081504| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) RIP after seven iterations

mirrorctrl.R |ERR| 48479|2011-07-04 22:36:04.708363| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****


idlctrl.R |INF| 119452|2011-07-04 22:41:52.360463| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40 iterations wait reduced to 3 sec no RIP


idlctrl.R |INF| 121098|2011-07-04 22:50:36.726862| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40 iteration no RIP


idlctrl.R |INF| 122730|2011-07-04 22:57:08.139667| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40iterations no RIP


idlctrl.R |INF| 124381|2011-07-04 23:08:29.675792| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

disabled fault recovery to avoid the switch bcu reset

print, read_seq_board(0, 0L,1L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.sram_mem_id)

print, read_seq_board(0, 0L,1L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.flash_mem_id)

fsm_reset() without load_program


Re-installed the original LBT672A switchbcu

idlctrl.R |INF| 127537|2011-07-05 01:01:35.657450| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) no RIP


idlctrl.R |INF| 129353|2011-07-05 01:31:38.041878| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

mirrorctrl.R |ERR| 52870|2011-07-05 01:33:54.000057| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

fsm_reset()

print, read_seq_board(0, switch_map.fastlinkhdr, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id)

idlctrl.R |INF| 129512|2011-07-05 01:38:23.276891| MAIN > Executing command: print, conv2hex(buf)
idlctrl.R |INF| 129513|2011-07-05 01:38:23.277246| MAIN > 06442000 0151B000 00089000 06448324 00000000 00000000 00000000 00000000

it appears that was stucked in writing the slope vectors (... Mario..)

print, read_seq_board(0, switch_map.numfltimeout, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id) 0001E46D

-- RunaBriguglio - 04 Jul 2011

Test using opencloseao

loop closed with binning 1, freq 312, mod 3

first closeloop: 13:56:44.349963| MAIN > Executing command: errcode = fsm_run_ao(312, 0, 0.00150602)

acq opencloseao launched: 13:57:49.781012| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.0107527)

it appears that the loop parameters have been changed.

the shell ripped after 4/5 open close

THE TEST IS LEADING TO NOWHERE, WE DECIDE TO CHANGE STRATEGY AND VERIFY OLD SwBCU

SwBCU replace: old one re-installed

2011-07-04 15:33:49.173677| MAIN > fsm_power_on()

shell set

loop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed 15:46:53.997833| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose

idlctrl.R |INF| 97809|2011-07-04 15:47:48.523646| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 97810|2011-07-04 15:47:48.525712| MAIN > fsm_stop_ao start
idlctrl.R |INF| 97811|2011-07-04 15:47:48.525771| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 97812|2011-07-04 15:47:48.525809| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 97813|2011-07-04 15:47:48.525850| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 97814|2011-07-04 15:47:48.525889| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 97815|2011-07-04 15:47:48.525929| MAIN > -1009

mirrorctrl.R |ERR| 46893|2011-07-04 15:47:48.525314| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 46894|2011-07-04 15:47:48.525373| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 46895|2011-07-04 15:47:48.839993| MAIN > *******
FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

LBTI fiber disconnected

test_skip_frame.pro modified, to avoid switch bcu reset at failure

shell set again

oop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed: 2011-07-04 16:37:43.552923| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose

idlctrl.R |INF| 98813|2011-07-04 16:38:09.208328| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 98814|2011-07-04 16:38:09.210919| MAIN > fsm_stop_ao start
idlctrl.R |INF| 98815|2011-07-04 16:38:09.210971| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 98816|2011-07-04 16:38:09.211021| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 98817|2011-07-04 16:38:09.211071| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 98818|2011-07-04 16:38:09.211124| MAIN > % READ_SEQ: READING ERROR BCU

mirrorctrl.R |ERR| 46940|2011-07-04 16:38:09.210526| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 46941|2011-07-04 16:38:09.210580| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile

SwitchBCU replaced: AdSec672b one installed

shell set

shell set again

oop prepared with parameters: bin 1 990 Hz, mod 3

rec=kl_v2/recs/rec_20100926_200632 (10 modes, bin1, mod 3)

focal station=front (port#1)

loop closed: 17:18:08.505208| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

acq openclose:

17:18:36.290053| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 100248|2011-07-04 17:18:36.292287| MAIN > fsm_stop_ao start
idlctrl.R |INF| 100249|2011-07-04 17:18:36.292363| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 100250|2011-07-04 17:18:36.292423| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 100251|2011-07-04 17:18:36.292485| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 100252|2011-07-04 17:18:36.292544| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 100253|2011-07-04 17:18:36.292601| MAIN > -1009

mirrorctrl.R |ERR| 47883|2011-07-04 17:18:36.291931| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47884|2011-07-04 17:18:36.291993| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 47885|2011-07-04 17:18:36.407620| MAIN > *******
FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

Test of manual close-open loop

idlctrl.R |INF| 101244|2011-07-04 18:03:57.987889| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 101245|2011-07-04 18:03:58.997115| MAIN > fsm_run_ao() start
idlctrl.R |INF| 101246|2011-07-04 18:03:58.997203| MAIN > fsm_run_ao() end
idlctrl.R |INF| 101247|2011-07-04 18:03:58.997258| MAIN > 0
idlctrl.R |INF| 101248|2011-07-04 18:04:05.514582| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode

idlctrl.R |INF| 101279|2011-07-04 18:04:23.939167| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 101280|2011-07-04 18:04:24.945944| MAIN > fsm_run_ao() start
idlctrl.R |INF| 101281|2011-07-04 18:04:24.946021| MAIN > fsm_run_ao() end
idlctrl.R |INF| 101282|2011-07-04 18:04:24.946086| MAIN > 0
idlctrl.R |INF| 101283|2011-07-04 18:04:30.326284| MAIN > Executing command: print,test_demo_mode()
idlctrl.R |INF| 101284|2011-07-04 18:04:30.326537| MAIN > IDL license file is running.
idlctrl.R |INF| 101285|2011-07-04 18:04:30.326589| MAIN > 0
idlctrl.R |INF| 101286|2011-07-04 18:04:30.885609| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 101287|2011-07-04 18:04:30.888003| MAIN > fsm_stop_ao start

mirrorctrl.R |ERR| 47930|2011-07-04 18:03:59.316547| MAIN > ****** FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47931|2011-07-04 18:03:59.316615| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47932|2011-07-04 18:03:59.316678| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47933|2011-07-04 18:03:59.316715| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47934|2011-07-04 18:03:59.316765| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47935|2011-07-04 18:03:59.316812| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 47936|2011-07-04 18:03:59.316856| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile


mirrorctrl.R |ERR| 47937|2011-07-04 18:04:30.887650| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

From:"wfsarb.R@M_FLAOWFS" To:"adsecarb.R" Code:014000 pLoad:2015

acq openclose with OVS

18:14:43.604651| MAIN > Executing command: errcode = fsm_run_ao(200, 0, 0.00119048) etc etc the shell doe not rip

acq openclose without OVS

18:16:09.914052| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) etc etc the shell doe not rip

acq openclose without OVS

18:20:26.777986| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) no rip

18:26:48.531000| MAIN > Executing command: errcode = fsm_run_ao(850, 1, 0.00116279) no RIP

18:29:30.882195| MAIN > Executing command: errcode = fsm_run_ao(900, 1, 0.00116279) no RIP but the shell has a strange shape

18:35:12.121634| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279)nop RIP

19:01:30.108366| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279) No RIP the flat shape was lost at the end of the test (iteration 8 or 9 out of 10

idlctrl.R |INF| 104460|2011-07-04 19:02:58.702229| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279)

19:02:59.817292| MAIN > ****** FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47984|2011-07-04 19:02:59.817351| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47985|2011-07-04 19:02:59.817403| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47986|2011-07-04 19:02:59.817442| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47987|2011-07-04 19:02:59.817486| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 47988|2011-07-04 19:02:59.817528| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *****

pending are increasing

19:08:27.344104| MAIN > Executing command: errcode = fsm_run_ao(950, 1, 0.00116279) no RIP

19:12:40.995848| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP!

idlctrl.R |INF| 105663|2011-07-04 19:13:13.155889| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode

mirrorctrl.R |ERR| 47990|2011-07-04 19:13:13.157416| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

master dump=ADAPTIVE-SECONDARY-DIAGNVARS_00001309806797_20110704_191317.sav

19:19:31.464443| MAIN > Executing command: errcode = fsm_run_ao(975, 1, 0.00116279) no RIP

19:22:28.334038| MAIN > Executing command: errcode = fsm_run_ao(975, 1, 0.00116279) no RIP

19:26:15.788896| MAIN > Executing command: errcode = fsm_run_ao(980, 1, 0.00116279) RIP!!!

idlctrl.R |INF| 107251|2011-07-04 19:26:46.078672| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD) & print, errcode
idlctrl.R |INF| 107252|2011-07-04 19:26:46.080781| MAIN > fsm_stop_ao start
idlctrl.R |INF| 107253|2011-07-04 19:26:46.080835| MAIN > fsm_skip_recovery FREEZE set
idlctrl.R |INF| 107254|2011-07-04 19:26:46.080889| MAIN > fsm_skip_recovery FORCE set
idlctrl.R |INF| 107255|2011-07-04 19:26:46.080954| MAIN > fsm_skip_recovery NOLOADSHAPE set
idlctrl.R |INF| 107256|2011-07-04 19:26:46.081017| MAIN > % READ_SEQ: READING ERROR BCU
idlctrl.R |INF| 107257|2011-07-04 19:26:46.081067| MAIN > -1009

mirrorctrl.R |ERR| 48037|2011-07-04 19:26:46.080358| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

19:30:35.247534| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

19:33:24.132376| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) shell shape lost no RIP

mirrorctrl.R |ERR| 48084|2011-07-04 19:34:12.216661| MAIN > ****** FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48085|2011-07-04 19:34:12.216749| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48086|2011-07-04 19:34:12.216790| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48087|2011-07-04 19:34:12.216862| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48088|2011-07-04 19:34:12.216949| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48089|2011-07-04 19:34:12.217020| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48090|2011-07-04 19:34:12.217061| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 48084|2011-07-04 19:34:12.216661| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48085|2011-07-04 19:34:12.216749| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48086|2011-07-04 19:34:12.216790| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48087|2011-07-04 19:34:12.216862| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48088|2011-07-04 19:34:12.216949| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48089|2011-07-04 19:34:12.217020| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA *****

19:36:07.293806| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

mirrorctrl.R |ERR| 48091|2011-07-04 19:41:57.536844| MAIN > ****** FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48092|2011-07-04 19:41:57.536907| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48093|2011-07-04 19:41:57.536943| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48094|2011-07-04 19:41:57.536987| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48095|2011-07-04 19:41:57.537025| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48096|2011-07-04 19:41:57.537058| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48097|2011-07-04 19:41:57.537099| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
mirrorctrl.R |ERR| 48091|2011-07-04 19:41:57.536844| MAIN > *******
FAILED PACKET FROM BCU 3 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48092|2011-07-04 19:41:57.536907| MAIN > *******
FAILED PACKET FROM BCU 4 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48093|2011-07-04 19:41:57.536943| MAIN > *******
FAILED PACKET FROM BCU 5 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48094|2011-07-04 19:41:57.536987| MAIN > *******
FAILED PACKET FROM BCU 8 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48095|2011-07-04 19:41:57.537025| MAIN > *******
FAILED PACKET FROM BCU 6 - CMD TIMEOUT CA ******
mirrorctrl.R |ERR| 48096|2011-07-04 19:41:57.537058| MAIN > *******
FAILED PACKET FROM BCU 7 - CMD TIMEOUT CA *****

19:45:10.654650| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

19:53:48.220415| MAIN > Executing command: errcode = fsm_run_ao(979, 1, 0.00116279) RIP!!!

mirrorctrl.R |ERR| 48098|2011-07-04 19:54:03.255566| MAIN > ****** FAILED PACKET FROM BCU 2 *****

19:47:36.562252| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP: the loast shape is not connected with the crates timeout ca, also the offload selector switches correctly between the two banks

start_acc commented

idlctrl.R |INF| 112141|2011-07-04 20:16:29.625652| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

mirrorctrl.R |ERR| 48146|2011-07-04 20:18:48.409148| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

20:28:52.197335| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

mirrorctrl.R |ERR| 48193|2011-07-04 20:29:00.698304| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *******
mirrorctrl.R |ERR| 48194|2011-07-04 20:29:00.698363| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED frown, sad smile

Test on enabling/disabling the fastlink

just changing the variable slopecmptr.R.fastlink_enable.req (0 or 1) in order to minimize the "activity" on the switch-bcu

20:38:03.698631| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

mirrorctrl.R |ERR| 48268|2011-07-04 20:29:55.667495| MAIN > ****** FAILED PACKET FROM BCU 2 *****

Again test with openclose

2011-07-04 21:47:06.305013| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279)

No rip


2011-07-04 21:54:21.779580| MAIN > Executing command: errcode = fsm_run_ao(978, 1, 0.00116279)

2011-07-04 21:55:16.124542| BCUCOMMANDHANDLE > BcuCommandHandler::handleBcuReply: REQUEST COMPLETED but FAILED :-(
2011-07-04 21:55:17.639869| MAIN > ****** FAILED PACKET FROM BCU 2 *****


idlctrl.R |INF| 116309|2011-07-04 22:02:25.779979| MAIN > Executing command: errcode = fsm_run_ao(978, 1, 0.00116279)

mirrorctrl.R |ERR| 48432|2011-07-04 21:56:03.030118| MAIN > ****** FAILED PACKET FROM BCU 2 *****

idlctrl.R |INF| 117403|2011-07-04 22:25:08.937268| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) no RIP

idlctrl.R |INF| 117898|2011-07-04 22:30:39.081504| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) RIP after seven iterations

mirrorctrl.R |ERR| 48479|2011-07-04 22:36:04.708363| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****


idlctrl.R |INF| 119452|2011-07-04 22:41:52.360463| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40 iterations wait reduced to 3 sec no RIP

idlctrl.R |INF| 121098|2011-07-04 22:50:36.726862| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40 iteration no RIP

idlctrl.R |INF| 122730|2011-07-04 22:57:08.139667| MAIN > Executing command: errcode = fsm_run_ao(977, 1, 0.00116279) 40iterations no RIP

idlctrl.R |INF| 124381|2011-07-04 23:08:29.675792| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) RIP

disabled fault recovery to avoid the switch bcu reset

print, read_seq_board(0, 0L,1L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.sram_mem_id)

print, read_seq_board(0, 0L,1L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.flash_mem_id)

fsm_reset() without load_program


Re-installed the original LBT672A switchbcu

idlctrl.R |INF| 127537|2011-07-05 01:01:35.657450| MAIN > Executing command: errcode = fsm_run_ao(550, 1, 0.00169492) no RIP

idlctrl.R |INF| 129353|2011-07-05 01:31:38.041878| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

mirrorctrl.R |ERR| 52870|2011-07-05 01:33:54.000057| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

fsm_reset()

print, read_seq_board(0, switch_map.fastlinkhdr, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id)

idlctrl.R |INF| 129512|2011-07-05 01:38:23.276891| MAIN > Executing command: print, conv2hex(buf)
idlctrl.R |INF| 129513|2011-07-05 01:38:23.277246| MAIN > 06442000 0151B000 00089000 06448324 00000000 00000000 00000000 00000000

it appears that was stucked in writing the slope vectors (... Mario..)

print, read_seq_board(0, switch_map.numfltimeout, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id) 0001E46D 00000000 timeout counter

print, read_seq_board(0, switch_map.paramselector, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id) 000000c4

print, read_seq_board(0, switch_map.paramselectorirq, 8L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id) 000061C4

read_seq_board(0, '80640'XL, 4L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id) 0006B575 wfscounter c4 paramselector

print, read_seq_board(0, '80C88'XL, 4L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id)

print, read_seq_board(0, switch_map.timeoutframerate, 1L , buf, /SWITCH, /ULONG, SET_PM=switch_datasheet.data_mem_id)

print, read_seq_dsp(-1, '89640'XL, 4L , buf, /ULONG)

Test suggested by Mario

idlctrl.R |INF| 134267|2011-07-05 02:49:21.271783| MAIN > Executing command: errcode = fsm_run_ao(980, 1, 0.00116279)

mirrorctrl.R |ERR| 53225|2011-07-05 02:51:19.416211| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

print, read_seq_dsp(-1, '89640'xl, 4L , buf, /ULONG)

Test on restoring OVS=0.002 while in close loop

idlctrl.R |INF| 136329|2011-07-05 03:26:44.186617| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode

idlctrl.R |INF| 136337|2011-07-05 03:27:21.071174| MAIN > Executing command: print, rtr.oversampling_time
idlctrl.R |INF| 136338|2011-07-05 03:27:21.071532| MAIN > 0.00200000

idlctrl.R |INF| 136415|2011-07-05 03:28:08.998069| MAIN > Executing command: errcode = fsm_stop_ao(/HOLD)

mirrorctrl.R |ERR| 53390|2011-07-05 03:28:08.999754| MAIN > ****** FAILED PACKET FROM BCU 2 - CMD TIMEOUT CA *****

Test with OVS =0.01

idlctrl.R |INF| 137191|2011-07-05 03:33:26.247438| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 137192|2011-07-05 03:33:27.332639| MAIN > Oversampling forced to 0.01

acq openclose 2 x 40 iterations no RIP!

Test with OVS =0.003

idlctrl.R |INF| 140449|2011-07-05 03:52:33.615263| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279)

idlctrl.R |INF| 140450|2011-07-05 03:52:34.710100| MAIN > Oversampling forced to 0.0030

RIP at first stop_ao

idlctrl.R |INF| 141355|2011-07-05 03:57:37.208198| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 141356|2011-07-05 03:57:38.286845| MAIN > Oversampling forced to 0.0030

RIP at second stop_ao

Test with OVS =0.005

idlctrl.R |INF| 142208|2011-07-05 04:01:34.995912| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 142209|2011-07-05 04:01:36.061483| MAIN > Oversampling forced to 0.0050

RIP at first stop_ao

Test with OVS =0.01 again

idlctrl.R |INF| 142961|2011-07-05 04:05:17.604144| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 142962|2011-07-05 04:05:18.696304| MAIN > Oversampling forced to 0.0100

40 iterations no RIP

Test with OVS =0.007

idlctrl.R |INF| 144618|2011-07-05 04:13:25.465566| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 144619|2011-07-05 04:13:26.547991| MAIN > Oversampling forced to 0.0070

RIP after 10 stop_ao

Test with OVS =0.008

idlctrl.R |INF| 145732|2011-07-05 04:18:21.220464| MAIN > Executing command: errcode = fsm_run_ao(990, 1, 0.00116279) & print, errcode
idlctrl.R |INF| 145733|2011-07-05 04:18:22.324862| MAIN > Oversampling forced to 0.0080

RIP!
Topic revision: r4 - 05 Jul 2011, RunaBriguglio
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback