Start last measurements set:

FQP hist: /home/aosup/adopt/current/calib/adsec/585m/CMD/disturb/dist_mag585_atm_s0.8_L040.0_v15.0_ovfreq1000.00_sd1983.fits

- 90deg -

STATUS: /home/aosup/adopt/measures/adsec_calib/status_save/20120530_151758/ss.sav

STEP: /home/aosup/adopt/measures/adsec_calib/step/20120530_151953

TURBULENCE: FQP

/home/aosup/adopt/measures/adsec_calib/disturbance/20120530_155122/telescope_CR_90deg_disturb_1000hz_TS5.sav

NOISE:

/home/aosup/adopt/measures/adsec_calib/noise/20120530_160127/noise_lin_.sav

/home/aosup/adopt/measures/adsec_calib/noise/20120530_160239/noise_nolin_.sav


- 25deg -

STATUS:/home/aosup/adopt/measures/adsec_calib/status_save/20120530_161114/ss.sav

STEP:

~/adopt/measures/adsec_calib/step/20120530_161601

TURBULENCE: FQP

(DA RIFARE: ASPETTA ALMENO 2 MINUTI!!! PRIMA DI FAR PARTIRE IL TUTTO) /home/aosup/adopt/measures/adsec_calib/disturbance/20120530_163825/telescope_CR_90deg_disturb_1000hz_TS5.sav

NOISE:

/home/aosup/adopt/measures/adsec_calib/noise/20120530_161216/noise_nolin_.sav

/home/aosup/adopt/measures/adsec_calib/noise/20120530_161258/noise_lin_.sav

NEW DATA FOR TURBULENCE 25 deg: /home/aosup/adopt/measures/adsec_calib/disturbance/20120530_214432/telescope_CR_90deg_disturb_1000hz_TS5.sav

Change FF MATRIX in $ADOPT_ROOT/calib/adsec/585/data/ with the last measured. (20120529_194752)

Shell set @ zenith. TURBULENCE DATA FQP: /home/aosup/adopt/measures/adsec_calib/disturbance/20120530_224840/telescope_CR_90deg_disturb_1000hz_TS5.sav

-- MarcoXompero - 30 May 2012
Topic revision: r4 - 30 May 2012, MarcoXompero
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback