Network down after LBT planned power outage. Lab switch is not configured anymore. Waiting for LBT to restore configuration.
Pre-installation of the cover, passing all the board cables in to the cover holes. This requires to open the box47 in order to disconnect and reconnect the TTmirror. After this the cooling of the AGW has beeen restarted.
Flexure test
Pos 0 (W on bottom; AG on top)
Pup x;y positions in pix
57.9 57.6
58.1 21.4
21.8 57.4
21.8 21.3
lato 36.18
POS 1 (3 holes)57.9 57.65
58.1 21.5
21.9 57.5
21.9 21.4
lato 36.14
POS 2 (6 holes 90deg) TIPTILT ANOMALY DETECTED57.9 57.6
58.4 21.5
21.8 57.4
21.9 21.4
lato 36.15
POS 3 (9 Holes) AGW rotated respect ambient lightconfig = flexures/clock9fori.txt
57.5 57.5
58.0 21.5
21.5 57.3
21.6 21.45
Recentered with stages
57.75 57.4
58.0 21.1
21.6 57.3
21.6 21.1
POS 4 (12 Holes 180deg) AGW rotated respect ambient light
57.7 57.45
57.95 21.1
21.6 57.3
21.55 21.05
lato 36.25
AMBIENT LIGHT OFF
POS 4 (12 Holes 180deg) FW1 = 4% ; FW2 =850-40
config = flexures/clock12fori.txt
ccd47 750;579
57.7 57.45
57.95 21.1
21.6 57.3
21.55 21.15
POS 3 (9 Holes)config = flexures/clock9forib.txt
ccd47 753;581
57.80 57.50
58.0 21.1
21.65 57.3
21.65 21.2
POS 2 (6 Holes)
config = flexures/clock6forib.txt
CCD47 757;563
57.85 57.4
58.0 21.1
21.6 57.25
21.65 21.15
lato 36.23
POS 1 (3 holes)
config = missing
CCD47 754;533
Centering stages for pupil balance
58.0 57.6
58.1 21.3
21.9 57.2
21.95 21.25
Repositioning stages in original position
POS 0 (0 holes)
config = flexures/clock0forib.txt
CCD47 764;520
Centering stages for pupil balance
58.0 57.6
58.05 21.25
21.75 57.25
21.8 21.3
Repositioning stages in original position
POS -1 (-2 holes)
config = flexures/clock-2forib.txt
CCD47 771;517
Centering stages for pupil balance
57.9 57.65
58.0 21.3
21.7 57.35
21.75 21.3
Repositioning stages in original position
--
AlfioPuglisi - 18 Feb 2010