h08:30 Retro montato

Fail della seriale del PIC dell'aux unit

Stamattina di nuovo la seriale comunica male.

Proviamo di nuovo ad aprire e toccare i fili, disconnettere e riconnettere il cavetto di GND e il Flat.

La seriale resuscita al massimo per qualche secondo.

Con il cavetto GND ( sul J7) disconnesso, il PIC si accende ugualmente e la seriale ha lo stesso comportamento.

Ci sembra di aver individuato i due cavetti della seriale +12 e -12 come i due fili blu e bianche vhe dal connettore MILLS vanno al flat.

Riassunto dei risultati delle nuove matrici

Bin 1 top performance

500 modi REC nuovo 222555 pup

primo TN= 20120910_163152

SRJaverage =0.513764
SRJ std_dev =0.0599123

Bin 2 top performance

New REC 175957

primo TN20120910_181001

SRJ average = 0.310937
SRJ std_dev = 0.00633108

Bin 3 top performance

New REC 180627

primo TN 20120912_185744

SRJ average =0.0975777
SRJ std_dev =0.00800940

Bin 4 "top" performance

New REC 223524

primo TN 20120912_223908

SRJ average =0.0347500

SRJ std_dev =0.00243872
.r /home/aoacct/sr_converter.pro

b1_m075=['20120910_163152','20120910_163217','20120910_163241','20120910_163343','20120910_163408','20120910_163433','20120910_165521','20120910_165547','20120910_165616','20120910_165718','20120910_165743','20120910_165808']
bin1 = obj_new('aodataset',[b1_m075])
mag_b1 = bin1->value('mag')
sr_b1 =bin1->value('irtc.sr_se')
sr_b1h=sr_converter(sr_b1, 1.07, 1.65)

b2_m075=['20120910_181001','20120910_181021','20120910_181041','20120910_181134','20120910_181156','20120910_181217','20120910_181829','20120910_181849','20120910_181910','20120910_182003','20120910_182024','20120910_182044']
bin2 = obj_new('aodataset',[b2_m075])
mag_b2 = bin2->value('mag')
sr_b2 =bin2->value('irtc.sr_se')
sr_b2h=sr_converter(sr_b2, 1.07, 1.65)

b3_m075=['20120912_185744','20120912_185800','20120912_185816','20120912_185913','20120912_185929','20120912_185946','20120912_190007','20120912_190024','20120912_190039','20120912_190137','20120912_190152','20120912_190209']
bin3 = obj_new('aodataset',[b3_m075])
mag_b3 = bin3->value('mag')
sr_b3 =bin3->value('irtc.sr_se')
sr_b3h=sr_converter(sr_b3, 1.07, 1.65)

b4_m075=['20120912_223908','20120912_223922','20120912_223936','20120912_224102','20120912_224115','20120912_224130','20120912_224147','20120912_224205','20120912_224219','20120912_224300','20120912_224314','20120912_224328']
bin4 = obj_new('aodataset',[b4_m075])
mag_b4 = bin4->value('mag')
sr_b4 =bin4->value('irtc.sr_se')
sr_b4h=sr_converter(sr_b4, 1.07, 1.65)

simul_table=fltarr(9,3)
simul_table[*,0]=[8.5,9.5,10.5,11.5,12.5,13.5,14.5,15.5,16.5]
simul_table[*,1]=[0.62,0.59,0.50,0.48,0.42,0.27,0.19,0.071,0.026]
simul_table[*,2]=[0.80,0.77,0.62,0.59,0.54,0.37,0.27,0.12,0.052]

plot, simul_table[*,0], simul_table[*,2], title='SR FLAO#2 @LFBG daytime Sep 2012', xtitle='R+I mag',ytitle='SR value (H band, rescaled from J)', charsize=2, yrange=[0,1], xrange=[7,18]
oplot, simul_table[*,0], simul_table[*,2],col='00ff00'x
oplot, simul_table[*,0], simul_table[*,1],col='0000ff'x
oplot, mag_b1, sr_b1h, psym=4
oplot, mag_b2, sr_b2h, psym=6
oplot, mag_b3, sr_b3h, psym=5
oplot, mag_b4, sr_b4h, psym=2
oplot, [7,18],[mean(sr_b1h),mean(sr_b1h)],linestyle=2
oplot, [7,18],[mean(sr_b2h),mean(sr_b2h)],linestyle=2
oplot, [7,18],[mean(sr_b3h),mean(sr_b3h)],linestyle=2
oplot, [7,18],[mean(sr_b4h),mean(sr_b4h)],linestyle=2


-- EnricoPinna - 14 Sep 2012

  • performances_bright.png:
    performances_bright.png
Topic revision: r1 - 14 Sep 2012, EnricoPinna
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback