• conf/adsec/672b/configuration.txt: all null string except shell field. Old file saved in configuration.txt.copy
  • conf/adsec/672b/TS5/elec.txt: empty act_wo_curr, act_wo_pos, act_wo_icc. Old file saved in elec.txt.copy
  • conf/adsec/672b/processConf/fastdiagn/fastdiagn.param: all actuators enabled. Old file saved in fastdiagn.param.copy

  • make install-conf
  • restarted software SX

  • shell does not set: seems a software problem with act lists
    • conf#20111113_180000: act 32 wo_po and wo_curr to test
    • conf#20111113_182000: act inner ring wo_icc to test problems with empty list
    • conf#20111113_184000: act wo_curr acts without magnets (DSP#341,375)
    • la shell ora setta, sembra che fosse un problema di liste vuote, probabilmente ICC. Da controllare.

  • act#546 in warning because high CHDISTRMS level (38nm rms): to be increased the threshold in fasdiagn.param

  • elevation slew test without ICC: nothing relevant

  • elevation sew test with ICC enabled:
    • 90deg: 2011-11-13 19:47:54
    • 20deg: 2011-11-13 19:49:08
    • 90deg: 2011-11-13 19:50:02
    • 20deg: ??
    • 90deg: 2011-11-13 19:52:28: #518; cluster of 2x2:295,232,233,280
    • 20deg: 2011-11-13 19:52:30
    • 90deg: 2011-11-13 19:57:09: #65 (50nm jump), #254
    • 20deg: 2011-11-13 20:02:42:
    • 90deg: 2011-11-13 20:02:45

  • conf#20111113_202000: reintegrato act 32 tolto per prova delle liste vuote

  • test setting the shell with AO gains, but without miniskirt and with shell-mounting poles
    • start test: 2011-11-13 21:06:08: start setting the shell
    • Setting successfull, but Roberto in the tent reported audible vibration. Fasdiagn reports lot of warnings of large position rms
    • end test: 2011-11-13 21:09:11
    • forced RIP

  • miniskirt mounting and shell-mounting poles removed

  • test setting the shell with AO gains
    • 2011-11-13 22:00:23: settaggio shell (gia' iniziato)
    • comfermato no risonanza
    • drift correnti comtrollo: act#386, 500. Confermato #65 dominante
  • slewing test:
    • 90:
    • 20: 2011-11-13 22:33:36
    • 90: 2011-11-13 22:35:32
    • 20: 2011-11-13 22:36:08
    • 90: 2011-11-13 22:36:20
    • 90: 2011-11-13 22:38:35
    • 20: 2011-11-13 22:39:31
    • 90: 2011-11-13 22:40:25
    • 20: 2011-11-13 22:41:00
    • 90: 2011-11-13 22:42:01
    • 20: 2011-11-13 22:43:32
    • 90: 2011-11-13 22:44:19
    • 20: 2011-11-13 22:45:05
    • etc, etc.
    • we had:
      • act 32 strange calibration
      • act#59, #66 20-30nm jump
      • act#341, #286, #183, #546 small drift or jump (<10nm)
      • act#513 10nm jump

    • 2011-11-13 22:50:53.: inizio a scaldare (20C)

    • 2011-11-13 23:05:20: fine misure e settato di nuovo a 10C

-- ArmandoRiccardi - 13 Nov 2011
Topic revision: r3 - 13 Nov 2011, ArmandoRiccardi
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback