LBCs Lab Setup Instruction
This is a brief description of how to setup the lab for the LBCs tests. These tests are suopposed to be executed for example during the annual summer shutdown maintenance.
Table of content
Lab Setup kit
Identify the Lab Setup Kit most likely stored in the LBC cabinet on 3L. The kit contains:
LBC windows test PC
3 Power cords
LBCs Power supply
J3 power cable
J1 to controller cable
- 24V Power Supply
Setup the PC and the Power Supplies:
Connect all the cables before turning on the power supplies. This way there's a common referenced ground at startup. The 24V may be connected to the vacuum gauge in order to read the cryostat pressure.
After turning ON the PC and the controller, launch the "test.exe" file on the PC desktop