UT 09-Nov-2019

Handover ~00:03

---

Plan is to conduct 1-2 engineering tests before continuing with ARGOS

• highest priority:
  • AGW-1 tests - 1 hour
  • LUCI speckle imaging - 1 hour
  • ESM tests - 45 min per script

---

AGW1-Tests: Steve A

Steve hunting for Target/GS/PA to get the X probe position to +/-140mm...

07:24UT ACTIVE preset RA 05:39:24.7 DEC +40:38:43.7 AZ 64.0 EL 60.5 Test

• newpoint AO203 TelM =ACTIVE gs=33 PA=30
• GS is set to SFP(x,y) (mm): -119.449, 22.3345

07:29UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 58.2 EL 60.3 Test

• newpoint AO198 TelM =ACTIVE gs=31 PA=-80
• GS is set to SFP(x,y) (mm): -152.526, 50.9072

07:32UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 58.0 EL 60.8 Test

• newpoint AO198 TelM =ACTIVE gs=27 PA=-135
• GS is set to SFP(x,y) (mm): -148.939, 36.2547

07:34UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 57.9 EL 61.2 Test

• newpoint AO198 TelM =ACTIVE gs=20 PA=-10
• GS is set to SFP(x,y) (mm): 123.653, 44.7596

07:37UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 57.7 EL 61.7 Test

• newpoint AO198 TelM =ACTIVE gs=20 PA=-160
• GS is set to SFP(x,y) (mm): -129.464, 23.0635

07:40UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 57.4 EL 62.3 Test

• newpoint AO198 TelM =ACTIVE gs=23 PA=-190
• GS is set to SFP(x,y) (mm): -135.275, 47.0682

Goldilocks config found, proceeding with test:

07:41UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 57.2 EL 62.7 Test

• newpoint AO198 TelM =ACTIVE gs=23 PA=-200
• GS is set to SFP(x,y) (mm): -141.392, 22.8639
• Z9/10 are unstable, oscillating

07:52UT Setting WFS_probeRotationFactor -1.0 float

• Sat Nov 9 07:52:00.373 2019 Stop GCSL: Success
• Sat Nov 9 07:52:04.380 2019 Start GCSL: GCSL started.

07:53UT ACTIVE preset RA 05:43:28.6 DEC +43:29:36.1 AZ 56.2 EL 64.5 Test

• newpoint AO198 TelM =ACTIVE gs=23 PA=-200
• GS is set to SFP(x,y) (mm): -141.381, 22.8721
• Z9/10 appear to be stable, low

Keeping WFS_probeRotationFactor at -1.0

---

---

-- BarryRothberg - 09 Nov 2019