AGw Unit Status

Links

• AGwStages

AGw Unit location and fiber connectivity status

• AGW1 - LUCI-1 (AIP) Telescope - LFBG
• AGW2 - LUCI-2 (AIP) Telescope - RFBG
• AGW5 - MODS-1 (OSU) Telescope - LDG
• AGW6 - MODS-2 (OSU) Telescope - RDG
• AGW7 - PEPSIPFU-1 (AIP) Telescope - LPFU Nov2013
• AGW8 - PEPSIPFU-2 (AIP) Telescope - RPFU Nov2013

• AGW3 - PEPSIPOL-1 (AIP) Summit Lab
• AGW4 - PEPSIPOL-2 (AIP) - RDG

AGw1

AGw2

AGw3

AGw4

MODS1

MODS2

AGw7

AGw8

AGw Unit move procedure from the Telescope to the Small Clean Room

• Reconnect request to move AGw unit from Telescope to Clean Room
• Fibers disconnected at the telescope
  1. Network Fibers disconnected from the telescope to the AGw
  2. G fibers disconnected at the telescope from the AGw
  3. W fibers disconnected at the telescope from the AGw
• CRB fibers reconnect for this AGw from Telescope location to Clean Room
• AGw Unit moved to the clean room
  1. Connect G and W channels at AGw to Small Clean Room fibers from LIU connected to G,W channels
  2. Connect "E-BOX" AGw connector to Small Clean Room Media Convertor #1 (for small AGw) connected to Switch 102 (port 3, 192.168.2.*) and small AGw Network fiber connectors
  3. Do not use "WFS-NET" AGW connector at Small Clean Room Media Convertor #2 (for BIG AGW) connected to Switch 102 (port 4 192.168.12.* ) and BIG AGW Network fiber connectors
• Update records at this page

AGw Unit move procedure from the Small Clean Room to the Telescope

• Reconnect request to move AGw unit from the Clean Room to the Telescope
• Fibers disconnected at the Small Clean Room
  1. Disconnect G and W channels at AGw to Small Clean Room fibers from LIU connected to G,W channels
  2. Disconnect "E-BOX" AGw connector to Small Clean Room Media Convertor #1 (for small AGw) connected to Switch 102 (port 3, 192.168.2.*) and small AGw Network fiber connectors
  3. Do not use "WFS-NET" AGW connector at Small Clean Room Media Convertor #2 (for BIG AGW) connected to Switch 102 (port 4 192.168.12.* ) and BIG AGW Network fiber connectors
• AGw Unit moved to the Telescope
  1. Network Fibers connected at the telescope
  2. G fibers connected at the telescope to the AGw
  3. W fibers connected at the telescope to the AGw
• CRB fibers reconnect for this AGw from the Small Clean Room to the Telescope location
• Update records at this page

AGw Unit test procedure after reconnect to the Telescope

• Test request to verify AGw unit is ready for Observation
  1. Verify the Power Cable is connected to AGw, when power cable was connected
  2. Test if power is available the the AGw unit (use Voltmeter)
  3. Verify Network fibers polarity at the AGw unit
  4. Check if AGw moxa is reachabe over the network
  5. Verify if G and W channels connected correctly and polarity of the fibers for G and W channels
  6. Use Fiber tester to verify polarity and light availability at the G channel
  7. Use Fiber tester to verify polarity and light availability at the W channel
  8. Use image acquisition to confirm G and W channels a) Turn the Dome Lights OFF (Call summit for clearance) b) For MODS only: (Open hatch, cal.unit out)
• E-mail to telescope after AGw unit is ready for Observation
• Update records at this page

Network

• Small Clean Room, Switch 102
  1. port 3, 192.168.2.* "E-BOX" AGw connector to Small Clean Room Media Convertor #1 (for small AGw)
  2. port 4, 192.168.12.* "WFS-NET" AGW connector at Small Clean Room Media Convertor #2 (for BIG AGW)
• Big Clean Room, Switch 103
  1. (port 2 192.168.10.* ) "WFS-NET" (for BIG AGW)
  2. (port 5 192.168.10.* ) "WFS-NET" (for BIG AGW Pyramid WFS)
  3. (port 7 192.168.10.* ) "WFS-NET" (for BIG AGW DX WFS)
  4. (port 8 192.168.10.* ) "WFS-NET"
  5. (port 9 192.168.10.* ) "WFS-NET"
• Big Clean Room, Switch 104
  1. (port 3 192.168.10.* ) "WFS-NET" (for BIG AGW)

Search