Large tilt Chopping test procedure (TBC)

The shell is set at 60um gap and a suitable shape is loaded. To reduce fringes density on the 4D (if needed), the shape is loaded using few modes only. Kill AO Arbitrator Set the the shell Con le GUI Kill AO Arbitrator Enable_lab_mode if needed Engineering GUI: z2 5 a 5 fino circa (25) circa 40 um minimo (usually -25um) salvare: using save_shape sottrarre 5 micron e salvare un'altra shape ripetere per -z2 ripetere per +z3 e -z3

Kill AdsecArbitrator process.

After that, edit the script file '$ADOPT_ROOT/conf/adsec//scripts/4d_chop_default.txt' writing the new chop_a_file and chop_b_file names. Do the same in $ADOPT_ROOT/idl/adsec_lib/test/

Rest and set the shell. Call the chopping test routines:
print, fsm_set_flat(/no_flat)
print, i4d_chop(200, /SAVE, /NOINTERF)

-- %USERSIG{MarcoXompero - 2014-06-17}%


Topic revision: r2 - 19 Jun 2014, MarcoXompero
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback