The hexapod positions of the SX and DX can be changed slightly from one time to another due to temperature, slight misalignment of the RR mount, etc..

Those values will be used as starting point for the spiral search procedure.

2014/02/17, DX ,

Focal Station	x(mm)	y(mm)	z(mm)	Rx(arcsec)	Ry(arcsec)	Rz	Note
RFBG					6	0

M3 position

Front BentGregorian

Tip(arcsec)	Tilt(arcsec)	piston	SelAng (degrees)

Alignment done using the CCD49. Luciufer 2 installed.

2013/09/12, DX ,

Focal Station	x(mm)	y(mm)	z(mm)	Rx(arcsec)	Ry(arcsec)	Rz	Note
RFBG	1.83	1.37	3.3	-328	226	0	Right spot on IRTC

M3 position

Front BentGregorian

Tip(arcsec)	Tilt(arcsec)	piston	SelAng (degrees)
-407	679	0	-25.8337

Alignment done using the IRTC.

2013/03/06, DX ,

Focal Station	x(mm)	y(mm)	z(mm)	Rx(arcsec)	Ry(arcsec)	Rz	Note
RFBG	-0.32	1.7	4.1	-380	-50	0	Right spot on IRTC

Alignment done using the IRTC.

2013/01/13, DX ,

Focal Station	x(mm)	y(mm)	z(mm)	Rx(arcsec)	Ry(arcsec)	Rz	Note
RFBG	-0.9	1.46	3.65	-59	-48	0	?

2013/02/09, SX ,

Focal Station	x(mm)	y(mm)	z(mm)	Rx(arcsec)	Ry(arcsec)	Rz
LFBG	1	1.46	4.5	80	163	0

Alignment done using the CCD47

-- JuanGuerra - 04 Mar 2013