AdamHousekeeper is the AdSec service that monitors the so called "slow" variables in the MOXA hardware (was previously ADAM) .

MOXA is a remote I/O device that controls the powering up. See also ASMMoxaMaterial.

These includes all the variables that can be accessed by polling the MOXAs' memory and I/O lines

AdamHousekeeper is a DiagnApp (<- read it!)


The monitored variables are listed in adamhousekeeper.param (see below). Try to guess what they do from their name smile

Source and configuration files

The following files/folder are about housekeeper:

  • $ADOPT_SOURCE/AdamHousekeeper
  • $ADOPT_SOURCE/DiagnApp

Configuration files

  • $ADOPT_SOURCE/conf/adsec/672a/processConf/adamhousekeeper/adamhousekeeper.param (or 672b)
  • $ADOPT_SOURCE/conf/adsec/672a/processConf/adamhousekeeper/adamhousekeeper.telemetry (or 672b)
  • $ADOPT_SOURCE/conf/adsec/672a/processConf/adamhousekeeper.conf (or 672b)
Topic revision: r1 - 21 May 2014, LorenzoBusoni
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback