Details.

10:30

Power on WFS

Arbitrator_80089|INF| 56|2023-03-15 17:37:56.888437| MAIN > Turning off RESET_BCU_47
WfsArbitrator_80089|INF| 57|2023-03-15 17:37:56.888609| MAIN > Turning on PROG_BCU_2K
WfsArbitrator_80089|INF| 58|2023-03-15 17:38:26.889016| MAIN > Cannot turn on PROG2K. Reason: Timeout waiting for powerboard.R.PROG_BCU_2K.CUR - TIMEOUT_ERROR - GENERIC_SYS_ERROR
WfsArbitrator_80089|ERR| 59|2023-03-15 17:38:26.889067| MAIN > Exception: Cannot turn on PROG2K. Reason: Timeout waiting for powerboard.R.PROG_BCU_2K.CUR - TIMEOUT_ERROR
WfsArbitrator_80089|ERR| 60|2023-03-15 17:38:26.889100| MAIN > Cannot turn on PROG2K. Reason: Timeout waiting for powerboard.R.PROG_BCU_2K.CUR - TIMEOUT_ERROR (-1000) GENERIC_SYS_ERROR

Operate.

timeout bayside stageX

Power cycle 24v

OK.

Argos cal unit arms.

error in status; input parameters.

RESET.
  • OK
  • Simotion OK
  • deploy ok
Adsec flat.
17:58:50.040540| MAIN > Maximum mode index used to apply flat -> # 623

11:07

test preset.

Wed Mar 15 18:04:52.587 2023 aos.PresetAO{FLAO}.started - PresetAO{FLAO}[599] (aomode:ACE-AO,focst:bentGregorianFront,instr:LUCIFER,wfs:FLAOWFS,sox:0[0],soy:0,rox:0[0],roy:0,mag:10,cindex:0,,elev:nan,rotang:nan,grvang:nan,r0:0,skybr:nan,windsp:nan,winddir:nan)
Wed Mar 15 18:04:52.604 2023 aos.info - WFS source set to: FLAOWFS
Wed Mar 15 18:04:52.717 2023 aos.info - FLAO: WARNING: added atmospheric disturbance file dist_flao2_KL_v20_atm_s1.5_L040.0_v15.0_ovfreq200.00_sd3892.fits
Wed Mar 15 18:04:53.532 2023 aos.info - FLAO: WFS: loading setup for LUCIFER
Wed Mar 15 18:05:20.002 2023 aos.info - FLAO: WFS: configuring CCDs
Wed Mar 15 18:08:20.735 2023 aos.PresetAO{FLAO}.failed - PresetAO{FLAO}[599] - [AOException] presetAO: FATAL - Reading shared buffer mirrorctrl.R:TECHVIEWER_65536 (-5001) TIMEOUT_ERROR

wfs arbitrator.

18:05:28.738620| MAIN > calibTVDarkInternal(): starting measure, 10 frames

waiting.

CCD47 live

CCD47 not live.

reset bcu

ccd47 live.

11:10

test preset.

Wed Mar 15 18:10:29.984 2023 aos.PresetAO{FLAO}.started - PresetAO{FLAO}[600] (aomode:ACE-AO,focst:bentGregorianFront,instr:LUCIFER,wfs:FLAOWFS,sox:0[0],soy:0,rox:0[0],roy:0,mag:10,cindex:0,,elev:nan,rotang:nan,grvang:nan,r0:0,skybr:nan,windsp:nan,winddir:nan)

ok

close looop.

ok

open loop.

18:18:08.798960| MAIN > Modes out of safe range ID: #118 #119
idl_143100 |INF| 9560|2023-03-15 18:18:08.799013| MAIN > Commands out of safe range ID: # -1
idl_143100 |INF| 9561|2023-03-15 18:18:08.799037| MAIN > Forces out of safe range ID: # -1

close loop

low gain:

TN:20230315_182026

looks like a mode static applied.

Rest shell.

flat.

open loop.

TN:_182310

cancel preset.

11:24

preset again

Wed Mar 15 18:23:50.489 2023 aos.PresetAO{FLAO}.started - PresetAO{FLAO}[603] (aomode:ACE-AO,focst:bentGregorianFront,instr:LUCIFER,wfs:FLAOWFS,sox:0[0],soy:0,rox:0[0],roy:0,mag:10,cindex:0,,elev:nan,rotang:nan,grvang:nan,r0:0,skybr:nan,windsp:nan,winddir:nan)

close loop

better:

TN:_182648

rotator:

park:209.3

speed 5deg/sec ->1 deg/sec

Bin1 rotation

ok

12:04

close tst preset.

Wed Mar 15 19:05:18.174 2023 aos.PresetAO{FLAO}.started - PresetAO{FLAO}[605] (aomode:ACE-AO,focst:bentGregorianFront,instr:LUCIFER,wfs:FLAOWFS,sox:0[0],soy:0,rox:0[0],roy:0,mag:10,cindex:0,,elev:nan,rotang:nan,grvang:nan,r0:0,skybr:nan,windsp:nan,winddir:nan)
Wed Mar 15 19:05:18.191 2023 aos.info - WFS source set to: FLAOWFS
Wed Mar 15 19:05:18.240 2023 aos.info - FLAO: WARNING: added atmospheric disturbance file dist_flao2_KL_v20_atm_s1.5_L040.0_v15.0_ovfreq1700.00_sd3892.fits

Wed Mar 15 19:05:21.127 2023 aos.info - FLAO: WFS: configuring CCDs
Wed Mar 15 19:08:20.535 2023 aos.PresetAO{FLAO}.failed - PresetAO{FLAO}[605] - [AOException] presetAO: FATAL - Reading shared buffer mirrorctrl.R:TECHVIEWER_65536 (-5001) TIMEOUT_ERROR

CCD47 not live.

reset bcu47 from HW

0089|INF| 708|2023-03-15 19:14:17.896002| MAIN > calibTVDarkInternal(): starting measure, 10 frames
WfsArbitrator_80089|ERR| 709|2023-03-15 19:17:09.977392| MAIN > Reading shared buffer mirrorctrl.R:TECHVIEWER_65536 (-5001) TIMEOUT_ERROR

Reset from HW Gui

ccd47 live.

preset.

optimize; 20230315_193008

failed.

autogain has the esm version.

lrwxrwxrwx. 1 AOeng AOeng 26 Feb 4 09:09 autogain.conf~ -> autogain.conf.ace.20230202
lrwxrwxrwx. 1 AOeng AOeng 26 Mar 6 04:02 autogain.conf -> autogain.conf.esm.20230204
-rw-rw-r--. 1 AOeng AOeng 16499 Mar 6 11:38 autogain.conf.ace.20230202

optimize:193128

change file

optmize: 20230315_193312

gopt

TN+luci:_193521,_

subwindow;512,512

TN+luci:_194424,_194750,_194945

dark: luci2.

tn+luci(exp2sec): _195715,_195759,_195838,_200118

lucidark:luci2.20230316.0035

ncpa on

3-15 20:02:29.264774| MAIN > arbFunc updateNcpaInternal (, 'FLAOWFS', 'LUCIFER', 209.001, 0)

TN+luci(darks):_200708,_200752,_201453,_

loop open (?)

reclose from flaogui

optimize:20230315_201647

gopt

ncpoaon

20230315_201905,_202349,_202438,_202748

1:35pm

Done

note to work with lucis.

Before to start to collect data it is better to set the Luci in a safe state in terms of scripts executions to a SAFE.

How to do it:

  • From the Observer panel.
  • LOAD
  • Directory: /lbt/lbto/luci
  • Select SAFE_*
select_SAFE_script_luci.png

If Luci was configured in subframe mode set back to full frame.

How to do it:

reset_full_frame.png

-- JuanCarlosGuerra - 15 Mar 2023
Topic revision: r1 - 15 Mar 2023, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback