Details.

09:42 AM

Power on WFs.
  • OCAm OK
  • shutter 50
  • Adxec flat
  • 1925|2022-12-29 17:13:50.749314| MAIN > Maximum mode index used to apply flat -> # 641
ARGOS CAL UNIT TAKES ABOUT 1 MINUTE TO REPLY THE COMMANDS USING THE ARGOS SWING ARM INTERFACE.

10:19AM

PRESETAO

MAG 15

parked 56.8, incremental encoder -21.49

working pos 186.85

10:37am
  • Adsec failure during the center pupils. The ocam went not live and the adsec skipping frames. To be investigated.
  • adsec/stop/start
  • apply flat
  • 5|2022-12-29 17:39:38.186895| MAIN > Maximum mode index used to apply flat -> # 641
10:40

presetao
  • loaded disturbance 1.5@1000Hz.
  • close loop
  • optimize gain 20221229_175738 with skip frames.
open loop
  • close loop gain01.modi10
  • TN:20221229_180122
change to default bin3 table.
  • better perfornaces.
  • optmize gain:20221229_180649,_180731
  • TN:20221229_180815
11:06am

stop

parked: 56.87

incremental:137.43

hexapod positions:

4.6,2.96,-1.24,-87 40,0 after close loop offload

slopes for the shifted pupil

-- JuanCarlosGuerra - 29 Dec 2022
Topic revision: r3 - 29 Dec 2022, JuanCarlosGuerra
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback