20201226 Alignment of SX M3

03:33 SX and DX M3 alignment complete

03:36 Set ACE preset to AO110, TS=2, RS=2, GS=0, PA=180
  • bin 3
  • Inst rot = 197

03:42 AdSec in Failure state
  • IDL>print, fsm_power_off()
  • 03:46 Set Flat
  • Now can not interrupt command.
  • Stop start AO Arbitrator. OK

03:44 WFS Master diagnostics process die
  • start mast process. not live
  • type to set loop parameter, get error
  • stop start process. Now live

03:50 New Preset
  • check pupil converge
  • Camera lens x=-95.32, y = -80.74
  • optgain fail
  • set gains to 3.05, 1.0, 1.0
  • TN 035759, 035835

04:00 Have to hand over. Open the loop on the WFS Control GUI

-- DougMiller - 27 Dec 2020
Topic revision: r1 - 27 Dec 2020, DougMiller
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback