SX Camera Lens Position

Lost the connection and my log was erased

I'm using the reconstructors listed in table_LUCIFER_ACE-AO.txt

Stages on, rotation rate: 0.5 degrees per second

Bin 1 341 to 0
  • Start: About 18:54
  • Stop: 19:05
Bin 1 zero to 360
  • Start: 19:06:30
  • Stop: 19:18:35
Bin 2 360 to zero, 1700 Hz
  • Start: 19:25:40
  • Stop: 19:39
Bin 2 0 to 360
  • Start:19:40:13
  • Stop: Safe skip and loop open at about 19:52
  • Start: 20:00:40
  • Stop:OCAM PROBLEM 20:05
  • It goes "Not Live" even though the mirror gui is receiving slopes
  • Restart of controller didn't work
  • Warming up camera for a restart
  • Just talked to enrico: 20:13, he said to restart the master diagnostic
  • That didn't work, so restarting the software.
Bin 4 zero to 360: Before applying pixel shift.
  • Start:20:45:43
  • Switched to only tip tilt as the X camera stage saturated at around an angle of 90
  • Stop: 20:58
Pupil Shift: makePupils.movePupils('20190604_094014,-1,0,240,5)

20191121_210252 Moved the wrong axis

makePupils.movePupils('20190604_094014,0,-1,240,5)

20191121_210625

makePupils.movePupils('20190604_094014,-1,-1,240,5)

20191121_210853

Still the wrong direction

makePupils.movePupils('20190604_094014,0,1,240,5)

20191121_211119

Works, now let's see if it will stay in range.

Bin 4 360 to zero: after pixel shift
  • Start: 21:14:15
  • Stop: 21:26:21
  • It saturates slightly.

-- GregoryTaylor - 21 Nov 2019
Topic revision: r3 - 21 Nov 2019, GregoryTaylor
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback