Daytime LUT Confirmation with splines, SX 20180412

17:42 Loop Close, bin 1, 990 Hz
  • El 90
  • flat 20180412_1.sav

17:56 Loop Closed, bin 3, 400 Hz
  • El 90
  • Hex -1.72 1.03 4.87 168 -227
  • bayside -75.7 -50.3 49.0 ( was 48.5, did improve focus)
  • source at 917, 1186 (near 912, 1100 from Dave T.)
  • move source to near CoR on LUCI1
  • bayside -75.7, -51.1, 49.0
  • source at 917, 1100
  • N30 Mask Aligned on corners
  • gain 1.5, 0.1, 0.1
  • Rotator at 341

18:19 Background on LUCI1
  • TN 182129, 182225 LUCI1 3, 4
  • Hexapod leg stuck. See IT #5935: #4j/ #4k #4j/ on OSSGUI
  • Move inst rotator to 450

18:35 El 90
  • TT LUT is spline version (wfsarb reported 436 LUT values read)
  • TT LUT is ON
  • bayside stages are power Off
  • 450 -> -90, increments of 15 degrees

  • First TN at rot 450 = 184229 LUCI1 = 05

  • Last TN at -90 = 194259 LUCI1 = 78

19:52 El 90, bin 4, 400 Hz
  • gain 0.7, 0.1, 0.1

  • First TN at -90 195616 LUCI1 = 79

  • Last TN at 450 202857 LUCI1 = 135

20:30 Move to 80 El
  • Hex -1.73, 1.035, 4.896, 175.2, -227.6
  • flat 20180412_80el_1

20:49 El = 80
  • First TN rot = 450 204758 LUCI1 = 136
  • Last TN rot = -90 212109 LUCI1 = 192

21:40 Tracking test
  • Start at El = 82 First TN 214205 LUCI1 = 193
  • Lost connection to the mountain after TN 220220 LUCI1 =214

22:00 Lost connection several more times
  • Stopping for the day
  • Connected and powered off the WUnit. Msgd was dead had to do a w_stop, start and then power back on. Communication to WUnit seem to be OK
  • Rested the AdSec. idlctrl process was dead so had to do an adsc_stop, start.
  • Set the shell and Rested.

-- %USERSIG{DougMiller - 2018-04-12}%
Topic revision: r3 - 12 Apr 2018, DougMiller
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback