DX TT LUT with RR of Zenith. 20180313

18:00 Powered on, starting alignment at 70 El

18:45 Added pmz.fits to configuration.txt in confcalib directory and then adsc_stop/start
  • the file pmz.fits had actuator missing (set to zero). This caused high forces on those ~12 actuators. Could not apply much Z5.
  • Created new pmz.fits file form original (in IDL) with the nearby actuator value copied into the actuator with 0.0. Wrote /tmp/pmz_new.fits
  • In ADOPT_ROOT directory make symbolic link from pmz_new.fits to pmz.fits
  • adsc_stop/start
  • Put 3 um of Z6. More and forces were too high. Close enough
  • Close loop in bin1 with 12 modes. Get it better
    • flat 20180313_70el_1 and _2. _2 better
  • Close loop with 300 modes. TT and HO1 only.
    • flat 20180313_70el_3
  • Close loop with 300 modes. TT, HO1 and 2
    • flat 20180313_70el_4

20:52 Start script
  • 450 09, 10, 11, 205120, 205145, 205208

  • Hex 1.2, 1.28, 4.56, -145.4, 254.80
  • Bayside -74.38, -50.075, -52.12

-- %USERSIG{DougMiller - 2018-03-13}%
Topic revision: r2 - 13 Mar 2018, DougMiller
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback