Closed Dome DX reconstructor Checkout 20180221

DX Closed Loop

05:30 Found DX CalUnit Source

06:11 Cleaned up aoroot/calib/wfs/W2/ccd39/LUTs pupil files
  • created ccd39/LUTs/old_bin* *=1,2,3,4
  • moved all extra pupil files in bin* directories to the old_bin* directories. This was the needed pupil file is the only one in the bin* directory and will always be loaded

06:25 Bin1, 990Hz, 400 modes closed loop
  • No Seeing
  • No NCPA
  • gain 0.75, 0.3, 0.2 (manual)
  • 062504, 062607, 062629
  • flat 20180221_1.sav
  • Hex -2.41, -2.37, 0.431, -146.3, -20.3 (Put them in PFS config file)

SX Closed Loop

06:45 Found SX CalUnit Light Source

07:25 Bin1, 990Hz, 400 modes closed loop
  • No Seeing
  • No NCPA
  • Changed RotatorOffsetBin1 in $ADOPT_ROOT/conf/wfs/current/processConf/wfsarb.conf to 225.6 (delta = -0.6) for coolant temperature of 1.7C
  • gain 0.65, 0.2, 0.15
  • 072452, 072916, 072930
  • flat 20180221_1.sav
  • Hex 3.44, 2.20, -0.745, 91.2, -174.3

08:00 to 09:30 try to figure out NCPA files. No luck

09:30 Setup DX to collect data with TT LUT on at Zenith

10:06 Start script, 90 El, 450 -> -90
  • gain 0-.7, 0.1, 0.1
  • had to set the irc proxy on LBTO@obs3 account
    • irc register 'bentGregoriarnFront right' LUCIFER
  • 450, 89, 90, 91,

Troubles with TT LUT turning on. See IT 7110

-- %USERSIG{DougMiller - 2018-02-21}%
Topic revision: r1 - 21 Feb 2018, DougMiller
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback