SX NCPA Measurements

05:10 pm

Getting Mount Ready

X stage did not properly home on first try, but it did on the second.

06:09 CCD 39 was unresponsive to every effort to restart it. Had to shut down wfs and do w_stop/w_start. After this, I could not home the X stage and had to rotate to 341 degrees (was still at 120 from yesterday) in order to do so.

06:18Going to 180 Degrees

Mode 4: 5.1, Default = 10

Mode 5: 53, repeated several times, default = 73

Mode 6: -30.8, Default = -28

Mode 7: -4.25, Default = 8

Mode 8: -5.1, Default = 10

Mode 9: -12.9, Default = -14

Mode 10: 19.7, Default = 20

Mode 11: -17, Default = -13

07:55 Moving to 240

Mode 4: 0, Default = -4

Mode 5: 3.5, Default = 5

Mode 6: 44.3, Default = 50

Mode 7: 11.8, Default = 10

Mode 8: -2.8, Default = 0

Mode 9: 6.5, Default = 4

Mode 10: -10.4, Default = -10

Mode 11: -12.1, Default = -14

08:48

Moving to 300

Mode 4: -11.5, Default = -15

Mode 5: -12.8, Default = -15

Mode 6: 28, Default = 0?!

Mode 7: 9.1, Default = 4

Mode 8: 3.8, Default = 13

Mode 9: -4.9, Default = -10

Mode 10: 13.5, Default = -10

Mode 11: -16.7, Default = -11

-- %USERSIG{GregoryTaylor - 2016-04-13}%

Comments

 
Topic revision: r1 - 13 Apr 2016, GregoryTaylor
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback