SX AdSec checkout and WUnit light source alignment check


Closed loop
slow rotator form 5 to 1 degree per second
move 10 degrees and snap image

default pupils
% change_binning 1

Shell set, anemometer off = warning
adsec arg off = AO Supervisor Alarm
Shell rested, anemometer off = No change (TSS Activated shown on AOSL GUI)
AOSL turned off = V state on AOSL Run State
Turn off 220V power = 220V Power Off Alarm

elevation not updating came on when AO Supervisor was shut off = Warning
I cannot force no elevation. Maybe can turn off MCS. Try some other time

Steve and Jenny are putting covers on instrument. Much rain and hail

Article text.

-- %USERSIG{DougMiller - 2015-11-26}%
Topic revision: r1 - 26 Nov 2015, DougMiller
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback