Backlinks to WhiteLightSource in ARGOS Web (Search all webs)

Results from ARGOS web retrieved at 20:53 (GMT)

CalUnitTricks
Cal unit deployment procedure Enable telescope Stow Pins Put telescope on HBS Laptop and climbing tools are stored on 3L, on ARGOS shelves Attach laptop t...
DayTime20141106
9:24: system fully started, LGSW, ADSEC, FLAO, IRTC are ready. On the FLAO we load the board setup 2014 05 16 ARGOS cal onaxis. Board stage mm X 70 ...
DayTime20150221
LgswUnitDx operation 8:00: we start opertations at horizon to fix the CalUnitSystem DiodeSource problem. It seems related to the low temperature in the C ring rac...
DayTime20151212
Test of DX LGSW with CalUnit and rigid secondary Hexapod settings with rigid secondary: Right PSF 2ndary X Y Z Rx Ry Rz 4.75 8.30 5.15 4.9...
DayTime20160310
7:30: power up of DX and SX systems. RR cubes are mounted back on both sides. Side PCT SX DX TipTiltSystemSx calibrations We setup the SX AGW...
DayTime20160311
SX QC and Pyramid co pointing We switch on the AGW and we configure it to be used with IS. FW1: 600 1000, we center on QC. Board 72.3 50.1 35.0 Then w...
r4 - 07 Apr 2016 - 12:44 by TommasoMazzoni
DayTime20161017
Sx side New Hexapod position after Coma Correction: SX HEXA 4.28 2.72 0.3 39 17 0 Comparison between QC and Pyramid To test the best gain and ...
DayTime20161018
DX side LgswUnitDx FoV measurement New Hexapod positions after coma removal: DX HEXA 1.60 4.18 1.18 181.5 79 We try to measure the FoV of the LGS...
r4 - 20 Oct 2016 - 23:58 by TommasoMazzoni
HowToPerformArgosAoLoopInDayTime
How to perform ARGOS closed loop in daytime This HowTo explains how to close an AO loop with the ARGOS system in daytime using the CalUnit as reference source. Th...
HowToSetUpForLUCIOffsetCalibration
How to setup the ARGOS system to measure LUCI pointing offsets The principle is to measure the LUCI pointing shift during a full rotator rotation while in closed ...
HowToSetupARGOSForCalibrations
How To Setup ARGOS for AO calibrations Pre requisits: * Coordinate telescope access with Telescope Manager and mail to telescopework * Telescope must be ...
HowToSetupCalibrationUnit
How to deploy calibration unit Deploy the arms from GUI (preferred) Prerequisite * Telescope at zenith. * Stow pins in. * ARGOS software running (see: H...
HowToShutdownArgos
How to shutdown and power off ARGOS properly At the end of a night or at the end of a day work shutdown ARGOS by: * Press button "Shutdown". * Daytime work...
NightTime20150223
19:00: bad weather, we deploy cal unit TipTiltSystemDx calibrations We start testing the TipTiltSystemDx: we set FLAO BIN4, 50 50 dichroic on FW1, WhiteLightSour...
Number of topics: 14
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback