Backlinks to PockelsCellAmplifierV2 in ARGOS Web (Search all webs)

Results from ARGOS web retrieved at 22:27 (GMT)

HowToChangePockelsCellAmplifierIp
We received instructions from Julian by email on 11/05/2016: To change the IP, you have to connect to the serial port of the controller (power supply rear side). ...
HowToReplacePockelsCellDriver
Instructions to replace a Pockels Cell Driver (PCD) on the telescope 1 In the LGSW Lab GUI, go to the "Pockels_cell" tab and press "Shutdown". 1 On the tele...
PockelsCellAmplifier
Description A device in the rack with an on off button and a potentiometer to adjust HV tension. This is an obsolete model, it has been upgraded in Jun 2015. See ...
PockelsCellAmplifierV2CommandLineScript
Power up, set up, ramp voltage, start up commands argos@sx lgsw the_pcd $ ./the_pcd.sh ARGOS THE POCKELS CELL DRIVER Missing command parameters. Use B0,B1,B2,B3...
PockelsCellsAmplifier3
Known history When Where Who What 20150611 OAA JZ, SR, MB, LB Installed in LgswRack2 201603?? LBT JZ Removed from LgswRack2 201605...
PockelsCellsAmplifier4
Known history When Where Who What 201507xx MPE JZ Shipped to LBT. It is stored somewhere ready to serve the LgswSystemDx 2015xxyy LBT JZ...
PockelsCellsDriverToAmplifierCables
Description There are 2 versions of these cable boundles: * The 2012 version, serving the PockelsCellAmplifier: it is a boundle of 5 cables, 4 coaxials with BN...
Number of topics: 7
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback