Children of FullARGOSStartUpProcedure in ARGOS Web

Results from ARGOS web retrieved at 17:55 (GMT)

HowToEnableMainPower
The ARGOS main power switches are located in the SX LaserSupplyRack on the LaserSupplyPlatform. They should be on all the time. If they are not on enable them i...
HowToLogInAndConnectToVNC
The following instructions apply if you want to run ARGOS from the obs machines in the LBT control room. If you are not at the telescope and want to run ARGOS rem...
HowToPowerUP
Pre requisits: * Organize telescope access with Telescope Manager and mail to telescopework * ARGOS chiller must be running (HowToStartChiller) * A...
HowToPowerUpLAN
This procedure brings up the LAN system until the launch system is ready for on sky laser propagation i. See FullARGOSStartUpProcedure for prerequisites: chil...
HowToPowerUpLAS
This procedure brings up the LAS system until lasers are ready to be propagated on sky i. See FullARGOSStartUpProcedure for prerequisites: chiller, main power,...
HowToPowerUpLGSW
This procedure brings up the LGSW system until the WFS is ready for on sky operation i. See FullARGOSStartUpProcedure for prerequisites: chiller, main power, l...
HowToStartChiller
How to Start the ARGOS Chiller The ArgosChiller is at level 4 and is installed, managed and maintained by LBTO. It provides coolant at 6C * IMPORTANT: The ch...
HowToStartSoftware
How to start Software There are multiple ways to start up the software and depending on situation one or the other is more appropriate. The ARGOS software has als...
Number of topics: 8
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback