Laser tracker measurement SX continue

  • Adjust of roll and tilt as well as position in park position with continuous check by laser tracker after each adjustment.
  • Final measurement on new working position: swing arm abs SX: 18659, in arm direction it looks like we are 8mm to long but can not shorten any more.
  • Take care that the dial gauge is pushed fully back so it can not move lateraly.
DSC01720.JPG

Table alignment with cardboard

  • After adjusting focus screw on gusset to lowest possible we got following positions:
x y z rx ry rz
-0.4 -1.4 4.116 100 -617.3 0
DSC01725.JPG

LAT arrival

  • LAT box did arrive and is stored in the high bay. Not opened yet.
  • Some minor damage is documented outside.
DSC01699.JPGDSC01700.JPG

DSC01702.JPGDSC01703.JPG

NOTE: It's Raining Again ...

DSC01706.JPGDSC01709.JPG

DSC01721.JPG

-- WolfgangGaessler - 08 Oct 2015
Topic attachments
I Attachment Action Size Date Who Comment
DSC01699.JPGJPG DSC01699.JPG manage 2 MB 08 Oct 2015 - 03:48 WolfgangGaessler  
DSC01700.JPGJPG DSC01700.JPG manage 2 MB 08 Oct 2015 - 03:48 WolfgangGaessler  
DSC01702.JPGJPG DSC01702.JPG manage 2 MB 08 Oct 2015 - 03:48 WolfgangGaessler  
DSC01703.JPGJPG DSC01703.JPG manage 2 MB 08 Oct 2015 - 03:48 WolfgangGaessler  
DSC01706.JPGJPG DSC01706.JPG manage 2 MB 08 Oct 2015 - 03:49 WolfgangGaessler  
DSC01709.JPGJPG DSC01709.JPG manage 2 MB 08 Oct 2015 - 03:49 WolfgangGaessler  
DSC01720.JPGJPG DSC01720.JPG manage 1 MB 08 Oct 2015 - 03:49 WolfgangGaessler  
DSC01721.JPGJPG DSC01721.JPG manage 1 MB 08 Oct 2015 - 03:49 WolfgangGaessler  
DSC01725.JPGJPG DSC01725.JPG manage 2 MB 08 Oct 2015 - 03:48 WolfgangGaessler  
Topic revision: r1 - 08 Oct 2015, WolfgangGaessler
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback