SX T-Gusset installation

  • At horizontal tube, turn upper shaft fully in.
  • At inclined tube, turn shaft only so far that there is the same distance in both direction from the middle.
  • On upper shaft put nut on up to the middle (take care that it is done in the right way. Pins toward the tube)
  • Lower nut already fixed on T-Gusset.
  • Attach T-Gusset on lower shaft.
  • Turn lower shaft until upper nut fits in.
  • Fix pins and adjust pins to T-Gusset (you might have to play a bit with lower shaft.
What is important:
  • Nut with pins toward tube.
  • Upper flexures should have play, lower flexures have to be the tight ones.
-- WolfgangGaessler - 08 Oct 2015
Topic revision: r1 - 08 Oct 2015, WolfgangGaessler
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback